1 / 4
10" inch rack mount for two SATA 3.5" HDD (or for 2.5" hdd/ssd with extra space) — zdjęcie 1
1 / 4

10" inch rack mount for two SATA 3.5" HDD (or for 2.5" hdd/ssd with extra space)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

for wide 10" racks on one piece to print

Ocena
0 / 5
Polubienia
13
Pobrania
105
Wydruki
0
Wyświetlenia
2417
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

1U mount for 2 x 3.5" HDD for wide 10" racks. The front panel is standard for my latest models is 258x44.45mm.

Printed with PETG, vertically - diagonally in one piece. I prefer to print everything in one piece at once, perhaps on a larger table the result would be much better and faster.

But in the process, one edge came off the table and there was a print defect (I'm still fiddling with the printer settings for stable printing). I did not interrupt the process, I had to finish it with a file and a knife, it suits me quite well so far “usable”. 

KEEP IN MIND - I have not yet checked the place for gluing SATA connectors, the dimensions were taken from another project. When the ordered parts arrive, I will supplement the description. 

Have a fun.

Tagi