Artie Pete and Pete Magnet (multi-color)(8x3mm magnets)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Artie, strongest man...in the world!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Pictured Example printed on a BambuLab X1C (Textured PEI)
Print Settings:
Initial Layer Line Width: 0.4mm
Wall Generator: Arachne
Wall Loops: 1
Bottom Surface Pattern: Hilbert Curve
Infill: 15% (Gyroid)
Initial Layer Speed: 30mm/s
Coloring: Prints have at least two main objects that I usually set as white (base) and black (outline). Additional coloring was added manually with the paint bucket and other tools. This one was a bit tricky, as it involved the paintbrush to cap off the blue stripes to allow a paint bucket fill without changing the whole outline object's color from black to blue. The extra effort really does turn out nicely, but I apologize for the extra work!
8x3mm Magnets to be glued in (magnet strip can be used instead)
Hope you enjoy!