Track saw clamp storage block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to keep my clamps with my tracks on my garage door, so made this to mount them.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted to keep my clamps with my tracks on my garage door, so made this to mount them.
Has a countersunk screw hole for mounting up through the top of the print. I ran a screw through and used silicone and hot glue behind to help hold it. Hot glue for immediate tack hold, silicone and screw for more long-term hold.
Printed in PLA+ with 4 or 5 perimeters, and 5 top/bottom layers. I needed a slight angle on the top of mine, but have a flat top version of the model uploaded as well. Prints on outward face down, just as model is oriented.
Happy printing!