Inlet Filter for FLSUN S1 and S1Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inlet-Filter for CPAP Fan (Partcooling) of FLSUN S1 and S1 Pro with magnetic base
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
The Air intake on S1 and S1Pro is on the top of the machine
this is a risk for sucking in dust
due to the higher flow rates of those used CPAP Fans the airstream is also potentially a risk for sucking in unwanted particles
therefore i bought a cheap filter on aliexpress:
https://s.click.aliexpress.com/e/_olOMWaN
i picked the 60mm version
additionally i printed this small ring with some 6x3mm Magnets
Part on the picture is made with PETG, a quick 12 minute print on those machines
Just plug in the Magnets and fit the part to the rubber piece of the Filter
Place that on the CPAP Inlet and you are done