1 / 2
Smooth Collet + Dekoring (no X-knurling) _ EX BCAR Rev 2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Smooth Collet and Dekoring (no X-knurling) for the EX BCAR Rev 2
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 353
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (12)Powiązane
Smooth Collet and Dekoring (no X-knurling) for the EX BCAR Rev 2
I wanted these two parts looking smooth on the outside and removed the X-knurling.
My print settings for PLA:
0,2mm layer height
5 walls
20% gyroid infill
7 top and bottom shell layers
no supports needed
Thanks to Epicxxxx for the files I could use for this remix.