1 / 8
E3D PZ probe PCB mount Stealthburner
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
E3D PZ probe PCB mount for Voron Stealthburner, used with the 'CNC Aluminun Carriage' but you can use the printed one.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 566
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (25)Powiązane
E3D PZ probe PCB mount for the Voron Stealthburner.
Pros:
- You can see the LED lights and the connections better since the board is inclined.
- Occupy less space.
- Easier to attach and detach the board.
I used mine with the GALILEO 2 and BTT SB2240; however, you can use it with any other with the same hole spacing as the original carriage upper part.
I used it with this CNC aluminum carriage link, other_link, but from what I could see, you can make a cut on the printed carriage, and it should work fine. I already did that and attached the files.
Here's how can be used with the modified ( cut ) printed version:
Aluminum CNC carriage mount:
!!! Attention :
- You will have to use a 10mm longer screw on the upper part of the carriage. The original were two M3x30 and I used a M3x40. I also used 2 x M3 nylon locking nuts but you could use normal ones (preferably with some Loctite or other threadlocker).
*CAD and STL files are available.