JUNCTION BOX | JUST 1 SCREW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hide a small wire connection in a compact wall box that opens quickly without removing extra cover screws.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Single-Screw Junction Box with Removable Cover
Hide a small wire connection in a compact wall box that opens quickly without removing extra cover screws.
Need a custom part for your setup? I design print-ready models from photos, sketches and measurements. Request a custom design
Small connections are often easy to hide but frustrating to access later. I designed this enclosure around a one-screw wall mount and a cover that slides into side guides, keeping the wiring visually contained while making the inside easy to reach again.
Key details
Overall height: 75 mm
Overall width: 50 mm
Distance between openings: 55 mm
Upper opening diameter: 3.5 mm
Lower opening diameter: 8.8 mm
One-screw wall mounting
Files included
Junction-box body and removable cover model
Important
This printed enclosure is not a certified electrical component. Use it only where the material, voltage, insulation, cable protection and local regulations are appropriate. Disconnect power before opening or working on wiring.
Follow me: roqd.one
roqd/m77