1 / 2
Flashforge Adventurer 5M (AD5M) Wire Clips — zdjęcie 1
1 / 2

Flashforge Adventurer 5M (AD5M) Wire Clips

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Used for securing 16-22AWG wires along the metal frame of the Adventurer 5M.

Ocena
5 / 5
Polubienia
82
Pobrania
393
Wydruki
2
Wyświetlenia
1628
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I was in need of basic cable management after installing Sniffynose's AD5M LED Mod, for the dual 24V 22AWG wire I used for the LED strip / lightbar. The clips simply pinch the thin frame extrusions and hole the wires against the enclosure. I ran my wires on top of the frame but could just as easily be run underneath for more invisibility. A fully enclosed retainer could be easily added to the design, .f3d attached.

 

Files:

AD5M Wire Clip.stl - dual 22AWG

AD5M Wire Clip-large.stl - dual 16AWG+ or insulation

AD5M Wire Clip-short.stl - adjusted for the frame holes near the filament sensor, untested

 

Printing:

Print flat on side, no supports. Scale as needed.

Tagi