Costco chair leg cap replacement (parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement cap for the legs of one of those padded folding chairs from Costco
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a quick model I designed to replace a missing foot on a padded chair from Costco. I designed it to match the original as closely as possible. It slips right on easily, and doesn't fall off. Orientation doesn't matter that much, I printed it with the open side up, but got some curling issues (it's like a 70 degree overhang), but you might print it with the open side down. Just use strong enough settings that it doesn't fall apart (I used 3 perimeters, and 2mm top and bottom shell thickness). I don't recommend printing in PLA, but you could send it and see (I printed it in Polylite ASA).
As a note, I am releasing this under a noncommercial licence but you can sell this in limited quantity on a irregular basis (for example, selling one to a friend if there chair broke). I am not OK with you using these for a business, however.