BIGDUG - Rail Mount Storage Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a basic Rail Mount Storage BinThis was designed specifically for the "BiGDUG Heavy Duty Garage Shelving Unit 3…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is a basic Rail Mount Storage Bin
This was designed specifically for the "BiGDUG Heavy Duty Garage Shelving Unit 3 Bay - 179x90x45 cm" but will work with any racking system that uses the same sized tabs.
In my testing I have managed to fill this up with 3KG without it immediately breaking. I was not able to test more then this as I filled up the box. Naturally the this will vary depending on the material and setting you use.
For supports, You do not need to use support on the front slope but I would recommend adding them to the rear tabs.
Print Settings
Printer Brand:
FlashForge
Printer:
Adventurer 5M Pro
Doesn't Matter
Supports:
Doesn't Matter
0.2
Infill:
15%
Notes:
I have only tested this using ABS. Use other filament at your own risk.
Category: Household