Perkis Power Heavyweights Magnet (multi-color)(8x3mm magnets)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Perkis Power
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Pictured Examples printed on a BambuLab X1C (Textured PEI)
Face-down Print Settings:
Initial Layer Line Width: 0.4mm
Wall Generator: Arachne
Wall Loops: 1
Bottom Surface Pattern: Hilbert Curve
Infill: 15% (Gyroid)
Initial Layer Speed: 30mm/s
Coloring: Prints have at least two main objects that I usually set as white (base) and black (outline). For the example print, I did use the paintbrush to cap off the smaller (inner) circle around the hands and feet so I could paint bucket fill that circle outline as purple, while keeping the outline around the perkis figure's hands and feet as black. Everything else was paint bucket fill.
8x3 Magnet recesses to allow gluing in the magnets easily (magnet strip can be used instead)
Hope you enjoy!
(see my profile for other multi-color prints)