Compact bit holders for GRITFINITY
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very Compact bit holders - pushing the limits compact.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
So i made these 2 bit holders because i wanted bit holders that could hold all the bits in one grit. AND fit into the box i printed which is the parametric box from Pred.
I made them to fit super close so its not easy to pick them with your fingers, but i never do that anyway i have a magnetic bit driver and it picks them out of there just fine, i think that is way easier.. Just keep that in mind before printing!
The 4mm bit holder takes 30 bits.
The 6mm bit holder takes 16 bits.
Print Settings.
- Infill 20% Minimum if you want rigidity.
- Layer height 0.16mm if you want a smooth design.
- Make sure you print inside of the holes first for accuracy.
- Printed in PLA, PETG, ABS.
- The Box i Designed is for:
https://www.printables.com/model/543553-gridfinity-storage-box-by-pred-now-parametric