1 / 6
BRZ/GR86 ESR Brand Qi2 ball joint arm adapter phone mount — zdjęcie 1
1 / 6

BRZ/GR86 ESR Brand Qi2 ball joint arm adapter phone mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter for ESR Qi2 Charger to mount in 2022+ BRZ/GR86

Ocena
0 / 5
Polubienia
11
Pobrania
65
Wydruki
0
Wyświetlenia
1435
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a piece that I made specifically so that I could adapt my ESR Brand Qi2 charger (https://a.co/d/04FSyxH) to this base that EngineerPro made (https://makerworld.com/en/models/17679#profileId-16433)  Im not sure if this adapter will work with other ESR brand Qi2 chargers but it works perfectly with the one linked above

The adapter allows you to unscrew the ball joint arm from the adhesive base and use it with the base designed by the creator mentioned above. You will have to extract the nut housed under the adhesive in order to use the same screw with this adapter. Insert a pause on your slicer to stop the print right before the top covers the hexagonal hole then drop the nut into place and continue the print.  Transfer the small round PTFE piece from the adhesive mount to the printed adapter. Screw it all together and enjoy your phone mount! 

This build along with a quality mag safe case has held my Galaxy S24 ultra in place even on super bumpy roads 

Recommended filament and print settings: PETG, 0.20mm layer height, 0.4mm Nozzle, print upright and enable supports on build plate only

I printed the base linked in the description in 95A TPU with a .20mm layer height

Tagi