1 / 19
Ovonic Lipo Guard Bag - Battery organizer — zdjęcie 1
1 / 19

Ovonic Lipo Guard Bag - Battery organizer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple caddy to organize RC batteries, charger and optional tool box

Ocena
0 / 5
Polubienia
1
Pobrania
17
Wydruki
0
Wyświetlenia
120
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

Organizing caddy to fit OVONIC Lipo Safe Bag, from Amazon 

  • Space for the OVONIC X1 Pro AC 300W (see amazon) 
  • Handle so everything can be removed when the bag is needed for charging Lipo
  • Slots for 8 standard 2S Lipo or NiMH batteries. 
  • Space for a tool or bits box
    • or 4 more batteries if you remove the toolbox.

Tool box I used, highly recommended: https://makerworld.com/en/models/377006#profileId-282924

  • My adjustment of the tool box to fit the caddy
  • Note: internal toolbox dimensions 118 x 155 x 44 mm. 
  • I glued a magnetic sheet to the lid - the one I used came with the Wowstick 1F- you can find similar on aliexpress. 

I printed with Prusament transparent and red PETG. 

  • 0,6 nozzle.
  • 0.3 layer strength profile (effectively 100% infill). 
  • Used supports only for the handle.

Tool Holder:  

  • 4 x holes for 18mm diameter driver handle
  • 1 x hole for 23mm diameter driver handle
  • bit holder uses 4x2mm round neodymium magnets
  • mag tray uses 10x1mm round neodymium magnets - CA glue to hold them in

-Note Left side is shorter to allow for thickness of magnet sheet glued onto the “lid”                        

 

 

Tagi