1 / 3
NACS to CCS Adapter Caps (Tesla/Rivian/Ford/Lectron) — zdjęcie 1
1 / 3

NACS to CCS Adapter Caps (Tesla/Rivian/Ford/Lectron)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Protective caps for NACS to CCS adapters from Rivian (made by Tesla) and Ford (made by Lectron).

Ocena
4,833 / 5
Polubienia
32
Pobrania
235
Wydruki
8
Wyświetlenia
1473
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

Here are some protective covers for your NACS to CCS adapters.  I only have access to the ones from Rivian (made by Telsa) and Ford (made by Lectron), so that's what I've included so far.  They're meant to protect the internal connectors and levers from damage and let you just throw your adapter into your frunk or anywhere else you want to store it.

The CCS covers include connection points that can be used to attach a lanyard if you find that useful.  Each piece should be able to slide on with a fairly snug fit so they don't rattle around.

Updates

March 7, 2025

  • Slight adjustment to exterior perimeter of ccs-rivian models to better align with adapter contour.
  • Adjusted nacs-rivian model to not fit quite as tight.  I printed in PETG-CF and when fully inserted, it was hard to remove.

Printing

  • I use PETG, which is probably fine.  You might consider ASA for better heat resistance.
  • No supports
  • I used 0.4mm nozzle and 0.20mm layers.
  • 2 perimeters seems fine.
  • I used 20% lightning infill and it gives a much “softer” overall feel (which I think I prefer) because it's mostly hollow.  You do you!

Support

If you like my models and want to make my day, you can buy me a ☕!

Tagi