Scuba DIN regulator cap with attachment point
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design is based on the excellent "Scuba DIN regulator cap" by wtrow.https://www.thingiverse.com/thing:5192202 I…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 510
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design is based on the excellent "Scuba DIN regulator cap" by wtrow.
https://www.thingiverse.com/thing:5192202
I made the cap a little longer on the top in order to make room for an attachment point for some line etc.
The V2 is just a little taller with a larger attachment point.
I printed mine with 15% infill as I'm using them to dustproof some hoses.
Cannot guarantee watertightness even at 100% infill.
Print Settings
Printer:
Prusa MINI+
Rafts:
No
No
Resolution:
0.2mm
15%-100%
Filament: Clas Ohlson PETG
Category: Sport & Outdoors