RatRig Rear IEC Mount - 3030
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for the IEC socket to go at the back of a RatRig instead of the side.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I wanted to mount the power at the rear of my RatRig Vcore 3.1 in an Enclosure 2.0 frame. The reason is I didn't want to spend a lot of money having panels cut on a CNC, it was cheaper to order full size panels and just do some cutouts myself with a jigsaw. Its easier to mount at the back rather than cut holes in the panel. Also, its more protected from children touching the switch or pulling the cable out.
I've included the .f3d and step files incase you want to edit for your own socket or mounting option. current bolt holes are just 2.4mm holes so they can be drilled out and tapped. Or you can drill out to 3mm and add nuts at the back. Or edit the file for heated inserts.