Lens cap holder (67mm) for Peak Design slide strap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Friction holder for 67mm lens caps on the Peak Design slide strap, tested with a Sony E Mount cap specifically.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Been wanting a lens caps holder like this for a while after losing too many to pockets, backpacks, setting them down and forgetting, etc.
The lens cap just clips in and is held by friction, I tried some kind of overhang to lock it in but couldn't get the tolerances to work, it's a very thin margin. It's a fairly sturdy holder regardless, it'll keep the cap secure through shaking the strap and moving around normally, sliding from front to back carry etc. If you REALLY shake the strap I have got the cap to pop out, but am confident with the holding strength under normal situations.