Lens cap holder (67mm) for Peak Design slide strap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Friction holder for 67mm lens caps on the Peak Design slide strap, tested with a Sony E Mount cap specifically.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 26
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
Been wanting a lens caps holder like this for a while after losing too many to pockets, backpacks, setting them down and forgetting, etc.
The lens cap just clips in and is held by friction, I tried some kind of overhang to lock it in but couldn't get the tolerances to work, it's a very thin margin. It's a fairly sturdy holder regardless, it'll keep the cap secure through shaking the strap and moving around normally, sliding from front to back carry etc. If you REALLY shake the strap I have got the cap to pop out, but am confident with the holding strength under normal situations.