Philips Hue Dimmer V2 2-gang Wall Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall plate adapter to hold 2 V2 Hue dimmer remotes.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
Two-gang wall light switch plate with slots to hold two Philips Hue dimmer switches (V2). Use this if you wish to replace your the light switches with Philips Hue remotes, hard-wiring the old switches to permanently-powered and relying solely on the remote and Hue bridge to control your bulbs.
The screw holes in the Hue remote slots line up with those in a standard electric switch wall box; you can re-use the screws from the outgoing light switch.
You will have to glue a metal plate to the back for the magnet in the remote to hold on to. I re-used the one from the plate that came with the remote.
I recommend printing vertically (upright) with a brim and hybrid tree supports. This gives a good aesthetic result without having to do too much support removal. Hybrid or strong tree supports will help prevent issues caused by printing something so thin and wide upright.