1 / 2
IKEA clothing rack (TURBO), shortening adapter — zdjęcie 1
1 / 2

IKEA clothing rack (TURBO), shortening adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

IKEA clothing rack (TURBO), shortening adapter for sloped ceiling / lower ceiling

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
63
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bedroom
Licencja
Creative Commons — Attribution — Noncommercial

Since I have a sloped ceiling, the IKEA Turbo clothing rack is not very space-efficient. To position the rack further to the side, this adapter is designed to shorten it to the desired height.

The part shown in the picture is made from PETG, but PLA can also be used.

For printing with an MK3 using standard settings (draft, 0.3 mm layer height), no support is required. A brim is recommended.

Tagi