1 / 1
Fox Bushing Spacer Crush Washer for MTB Rear Shocks — zdjęcie 1

Fox Bushing Spacer Crush Washer for MTB Rear Shocks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is the crush washer with "nipples" used on most modern metric mountain bike shocks from Fox and Marzocchi.

Ocena
0 / 5
Polubienia
3
Pobrania
33
Wydruki
0
Wyświetlenia
142
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Replacement for Fox crush washer. Easy to lose when swapping shocks.

Print PETG, 100% infill. 0.2mm layer height or less. Smaller nozzle is better to get the details, 0.4mm works fine. The reference picture is printed with 0.6 nozzle at 0.2 layer height. Install with the bumps facing out. A harder TPU would probably work great, but I haven't tried it.

Been using on my Float X and DHX2 210x55 for a season now with no issues.

Tagi