M10>M8 Flanged Bushing Mod SidewinderX2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model allows replacing an M10 threaded rods with an M8 without the need to modify the original Z-axis stabilizer.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — NoDerivatives
M10>M8 Flanged Bushing Mod
My settings (recommended):
filament: PETG
nozzle: 0.4
layer: 0.2
Short story about model:
While looking for a good Z-axis stabilizer for my Artillery Sidewinder X2, I found a model made by @ElvisPresley and I really appreciate his work. But because of the weight and cost, I decided to use M8 threaded rods instead of M10. That’s why I designed these flanged bushings to make sure the screw fits snugly in the stabilizer parts. I hope my model helps someone. If you like it and want to support my work, feel free to give it a like! 😊