Liczymy pasujące modele…
Project Summary: Using this to adapt to a hopper window insert for venting my resin printer in a grow tent. My Print Settings: 20% gyroid infill .2mm height Support from build plate for flange half (connection studs) Printed with PLA
Wydruk około 7,11 €–8,68 € nettoWstępna wycena jednego wariantu
A K1 and K1 Max full gantry redesign utilizing flanged bearings in place of the low quality factory idlers.
I printed mine with a 0.08mm layer height and the threads fit wonderfully, it threads on nice and smooth and tightens well. The external dimensions of the nut are the same as the ones that come on the jacks so you can use the same socket…
The motormounts in the photo are slightly different, they are the old version. The attached files contain all models of the current version at the time of publication.
Print flat side down at a decent layer resolution and you're good to go. Probably wouldn't recommend PLA seen as it might crack under heavier use. Needs some force to screw in first time because I added next to zero tolerance so it's as…
Unchanged and added for the kit: higher_tensioner_spacer, interbearing-washer, lower_tensioner_spacer. The X-axis carriage is based on a CAD model from Henlor -https://makerworld.com/en/models/171995 The X-axis carriage with an oval hole…
I haven't done much printing, but I found that neither of my printers care for having the timing belt system going. They were both printing like crap, so for an acid test I took this off both any they started printing great again. So at…
Somewhere between changing between version 1 and, version 2 - and back again - of the E3D Revo Mount for the Prusa Mini, the M12 flanged nut went missing. Personally, I think one of my cats decided to bat it around - this one probably -…
Bearing conversion of the axle to reduce vibration. It works very wellIf you want to use a linear rail you have to use the XY joint from here. https://www.printables.com/de/model/855093-k1k1max-x-axis-linear-rail-remix/files
M10x0.5 flanged nut to fit on the backside of a Bowden tube fitting. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 25 Filament: Overture PETG Black Category: Parts
Parametric flanged bushing. You can set the sleeve inner/outer diameter, sleeve height, flange outer diameter, and the flange height.
I created these parts to make a educational model of a oil processing pipe line. The parts slot into each other and you print whatever you need for your model. The parts should be fairly easy to print even on cheap printers. Category:…
just some flanged washers for some body work panels Category: Automotive
Updated design of a double flanged connector for the hoses of portable air conditioners of the dual hose kind, hose diameter 150 mm. The file contains to versions: Open To secondary hose The images feature an older version. This new one…
Various thread sizes: M3, M3.5, M4, M5 and M6.
Gates Heavy Duty 16 tooth flanged pulley for 6mm belts Heavy Duty version of the common 16 tooth flanged pulley used on 3D printers. Model for printer and part recreations. Please leave a “Like” Thanks for downloading
A Flanged mace designed to fit a nominal 1" rattan shaft. The Step and Fusion files are also provided to assist in adjusting the mounting hole for a proper fit. The 6 flanged mace is slightly more historically accurate but the 8 flanged…
Gates Heavy Duty 40 tooth flanged pulley for 6mm belts Heavy Duty version of the common 40 tooth flanged pulley used on 3D printers. Model for printer and part recreations. Please leave a “Like” Thanks for downloading
The original axle falls off one side of the dispenser too easily, so I remodeled it and added a flange. Due to the flange, it has to be assembled in order to go through the spool, so I threaded one end and made it two parts. I…
Brushless outrunner electric motor firewall for use with most motors with a 16mm x 19mm bolt circle for direct mount, or 34.5mm X-mount bolt circle. 16mm x 19mm mounting locations are slotted to accommodate any motor orientation. Ribbed…
While it might not really be necessary on an Ender 3 to fix the z-screws at the top, I got the flanged bearings anyway when purchasing a second lead screw ( Amazon link ), so I wanted to at least put them to use. The bearing must be slid…
My CR10 is a bit modified and the Z steppers have been pushed away a bit from the normal position. This guide allows a wider range of distances but also covers the stock location. Use the bearing (F688ZZ Flanged) and screws (countersunk…
This is a replacement for the little flanged plastic things (Ferrules? Grommets? Eyelets?) that go in the hinge mounts in the K1's glass door, which prevent rattling and provide a buffer between the glass and the metal screw. Two of these…
Generate a flanged split bushing / sleeve. You can specify the following: SLEEVE Inner diameter Outer diameter Length FLANGE Outer Diameter Height SPLIT Width Position from center Angle FLANGE SLICES (Slices through flange for flexing)…
Print at whatever resolution you like scale up to your needings (I found 102% scale fits well my 8mm rods) bushing first of his type, here in thingiverse : found the mockup of this exact bushing but without any groove on the inside. I…
Flanged M6 nut with a built-in filament guide, solution for connecting PC4-M6 fittings to your filament dry box. Designed with a tapered guide at one end, this nut ensures smooth and precise filament routing, reducing friction and…
Replacement part for John Deere mowers/tractors. Print in ASA as minimum. You can use my parametric to make your own: https://www.printables.com/model/1348321-parametric-flanged-bushing-sleeve
Bushings are useful for adapting shafts and holes. With the chamfer and flange options, the bushing can fit in holes with eased corners, and can support itself in a drilled hole. The taper options make the bushing into reducer or cone.…
Brushless outrunner electric motor firewall for use with most motors with a 19mm x 25mm bolt circle for direct mount, or 44mm X-mount bolt circle. 19mm x 25mm mounting locations are slotted to accommodate any motor orientation. Ribbed…
Gates Heavy Duty 20 tooth flanged pulley for 6mm belts Heavy Duty version of the common 20 tooth flanged pulley used on 3D printers. Model for printer and part recreations. Please leave a “Like” Thanks for downloading
Go to Modify > Change Parameters linewidth: the width of the line in your slicer settings wallfactor: number of lines per wall wallthickness: linewidth x wallfactor fanA: top fan size (smaller) fanB: bottom fan size lip: the straight part…
The original was a good start, and good for a moldable form. This thing represents some simple modifications to the original design to make it more easily printable. There are two primary changes. 1) There is now a central hub that is a…
A flanged end cap to match with an open-ended grip. This is to suit a 22mm bicycle handlebar. I've printed successfully with PETG. Some concussive persuasion and it'll slot right in.
Compliant connecting mechanism that I presently don't know the proper name for. Print in PETG or ABS/ASA. I would not recommend PLA. Fusion 360 CAD file attached to edit thicknesses for different materials.
flanged hexagon insert for light bar original model on https://www.printables.com/it/model/213715-prusa-mini-light-bar
Original adapter: https://www.printables.com/model/1184293-adjustable-spool-holder-for-silica-gel-spool-weigh I modified the adapter to fit this desiccant holder:…
Made to mount a 1-gang electrical box to a mount. Screws into ½" NPT threads of a wet location electrical box (TayMac brand in this case). Printed with supports, though you might get away without supports if printed threads-up.
Remix of the shell component only for the original "Spool Holder CR10S-Pro 608-Bearing." Shell has chamfered ends to keep filament spools from sliding off. Use all other original files provided by the original author.
Blue Series flanged Z motor cages for Rat Rig V-Core 3 (version 3) Please also see my Gold Series versions of these if you want an even more rigid rear motor mount or compatibility with a V-Core 3.1…
Added a small flange to make sure that the outer ring of the bearing doesn't touch the printed guides. Short version is 2mm shorter to account for the samlas embossment in the middle. Category: 3D Printer Accessories
A simple compression spring which uses the material compression. Print with TPU or other depending on rigidity needed. Step File Included Please leave me a “Like”. Thanks for downloading <3
If you need a modified version then check here: https://www.printables.com/model/1348326-parametric-flanged-split-bushing-sleeve
This is a post support with flange mounts on the ends. It uses a bike seat post quick toggle clamp to lock in a position. I built these make and adjustable infeed support for my miter saw. For my case I just let the support post pass thru…
Template for filing the flanged nut used on IndyMill, just attach with some screws…
I've had a few of the nut covers from the rear suspension on my Chief Darkhorse "borrowed" and wanted a printed solution so I could maintain a matching look across the motorcycle, so I designed this cover to replace the missing originals.…
A replica/cosplay prop of a 15th century blunt weapon that might be inspired by a flanged mace wielded by a certain historical figure who had a vision problem and was famously portrayed in a quite recent video game. Also works as a back…
I was installing a fire/action button on the lockdown bar of my virtual pinball machine. I realized that I didn't have a nut the right size to use to secure it to the lockdown bar, or a washer that would work with that. I decided not to…
Rartrig V-Core 4 and 3 use an aluminium support bar for the x gantry. Changing the alu extrusion to a square tube made of titanium reduces the bimetallic bend. When installing the ti tube, something has to keep the nuts in place when…
theres nothing really to say other than whats in the name. I just needed something to slide onto a 16.3 ish aluminum rod/shaft. printed 2 of these with another 4 inch coupler in under 3 hours on ender 3 s1 pro using ASA and .4 nozzle… the…
M10>M8 Flanged Bushing Mod My settings (recommended): filament: PETG nozzle: 0.4 layer: 0.2 Short story about model: While looking for a good Z-axis stabilizer for my Artillery Sidewinder X2, I found a model made by @ElvisPresley and I…
A customisable, parametric flanged bush with options for three different types of locking fingers/clips to plug the end of a PVC pipe, mailing tube, other cylinders. Customisable parameters include: sleeve outer diameter sleeve thickness…
sorta inconsistent but works ig :3 have fun!
This is a highly reinforced, parametric hose barb adapter for union nuts (commonly used in pool plumbing, PVC-U ball valves, and marine water tank fillers). Unlike standard designs, this version features an optimized 2x45° ridge profile…
Turtleneck filament buffer with a flange for VBH taping to the wall of a printer.
Backstory Recently, I picked up a used 44" snowblower attachment for our John Deere x370 riding mower. After setting up the blower, one of the last few steps is to attach the chute adjustment rod to the side of the mower. I noticed there…
A screwable mount for generic flanged C14 inlet connectors, fits into the 1U Modular Tray system. The screw holes are 2.8mm designed for 3mm screws to self thread. Prints at 0.2mm Layer Height, face up or face down. Needs supports if…
Full industrial pipe wedge gate valve assembly: cast flanged valve body, bolted bonnet cover, rising stem, and 4-spoke control handwheel. Трубопроводная запорная арматура: цельнолитой фланцевый корпус, крышка сальникового узла, шток и…
A mount for the Hammond 1590UFL Flanged Case. The holes are not drilled on this, and should be done manually. The original version of this had no diagonal support, and the two WiFi looking antenna fins were likely to break off. This was…
Precision shaft coupling assembly: two interlocking flanged hubs with centering register and keyways, bolted securely with fitted bolts. Сборочный узел соединения соосных валов: две фланцевые чугунные полумуфты с центрирующей выточкой и…
This is a bushing for the Whirpool, Bauknecht, Indesit, Ariston, Hotpoint washing machines. This is the list of the supported washing machines: Part Code Brand 488000534183 WHIRLPOOL BAUKNECHT C00481360 C00534183 INDESIT ARISTON HOTPOINT…
Gates Heavy Duty 20 tooth flanged pulley for 6mm belts Heavy Duty version of the common 20 tooth flanged pulley used on 3D printers. Model for printer and part recreations. Please leave a “Like” Thanks for downloading
I was installing a fire/action button on the lockdown bar of my virtual pinball machine. I realized that I didn't have a nut the right size to use to secure it to the lockdown bar, or a washer that would work with that. I decided not to…
Compliant connecting mechanism that I presently don't know the proper name for. Print in PETG or ABS/ASA. I would not recommend PLA. Fusion 360 CAD file attached to edit thicknesses for different materials.
Turtleneck filament buffer with a flange for VBH taping to the wall of a printer.
While printing the spool would wobble, making me nervus that something was going wrong and occasionally on tall, wide prints the spool would make contact with print head so I made this bushing/spacer to hold the spool away from print head…
Hi This is a bushing for homemade wooden weightlifting plates able to fit an olympic weightlifting bar. It replaced the old broken bushing. It has now been tested in practice for three years and is able to sustain the loads from…
Parametric FreeCAD Ducts in Square and Rectangle. WxH, Throat Radius, Wall thickness/gauge, Angle and Flanges are configurable. NOTE: The square one works better going past 90 degrees, for some reason the rectangle flange_2 gets messed up…
This is a really simple, print in place flanged bearing for Nerf BCARS. Use a thin lube for better spinning. Updates: 8/24/25; added a seperate design that isn't print in place and you just snap the two parts together. Naming scheme:
Added flanges for the Y axis as the source gear did not work with my setup. Total width = 8.5mm Print Settings Printer: Anet A8 Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 20% Category: 3D Printer Parts
Желательно смазать вентиль силиконовой смазкой для плавности вкручивания. / It is recommended to lubricate the valve with silicone grease for smooth threading.
Raspberry Pi 4 sleeve case with flange for 2xM3 screws, 60mm apart
A universal functional flanged spacer (bushing) designed to fit tightly into a bearing with a 20mm inner diameter, allowing an M12 bolt to pass through. The 25mm flange acts as a stop/support against the inner ring of the bearing. It…
A flanged M10 x 1.25P nut for holding parts together at disassembly. Not to be used for any serious load. Modelled from an Automotive bolt as you can see in the photo. Thread is modelled the same as the standard nut, but seemed to tighten…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/kV4f0rcdAAG Category: 3D Printing
This is a universal spool roller for spools of diameter 200mm and up. Print instructions Category: 3D Printer Accessories Summary This is a universal spool roller for spools of diameter 200mm and up. Instructions Print two copies of the…
This remix adds a flange for mounting to a surface like a desk. The flange helps with wobble in all directions. I printed mine with PETG, 5 perims and 4 top/bottom layers at 0.24 height.
