1 / 5
Sleeve for plunger (iron core) - Hülse für Eisenkern in Magnetspule für mein Pinball Project — zdjęcie 1
1 / 5

Sleeve for plunger (iron core) - Hülse für Eisenkern in Magnetspule für mein Pinball Project

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sleeve for the plunger (iron core) in the coil FL11-629 (also 630 + 640), Hülse für den Eisenkern der Spule

Ocena
0 / 5
Polubienia
4
Pobrania
36
Wydruki
0
Wyświetlenia
132
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

English: For my pinball project, I needed a sleeve for the plunger (iron core) in the coil FL11-629 (also 630 + 640)
This variant is for "my" core, with d=10.5mm.

Approx. dimensions: sleeve outside - 12.3mm, inside - 11.0 mm
length - 65mm, ring 38x2mm;

I will upload the 3mf file, so you can customize it yourself!

Printed with this PLA - very smooth.. * https://amzn.to/3E0ZOxC

*Affiliate Link's

Link to my Youtube Channel: https://www.youtube.com/@VolkerVolkach here you will find my pinball project in a few weeks..

German: Für mein Pinball Projekt, benötigte ich in die Spule FL11-629 (auch 630 + 640) eine Hülse für den Plunger (Eisenkern)
Diese Variante ist für "meinen" Kern, mit d=10,5mm.

Abm. ca. : Hülse außen - 12,3mm, innen - 11,0 mm
länge - 65mm, Ring 38x2mm;

Ich werde die 3mf Datei hochladen, so könnt ihr diese selber anpassen!

Gedruckt mit diesem PLA - sehr schön glatt.. * https://amzn.to/3E0ZOxC

*Affiliate Link's

Link zu meinem Youtube Channel: https://www.youtube.com/@VolkerVolkach 

In Kürze ist da das ganze Projekt zu sehen..

Tagi