1 / 6
Clamp for holding a shelf attached to a floor lamp (Heavy Duty) — zdjęcie 1
1 / 6

Clamp for holding a shelf attached to a floor lamp (Heavy Duty)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two halves clamp containing a slot for inserting a shelf at 45-degree angle. Holds two MacBook's for me.

Ocena
5 / 5
Polubienia
3
Pobrania
11
Wydruki
0
Wyświetlenia
127
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

We needed a way to hold two laptops near the piano where my daughter is learning online how to play. Since the floor lamp was standing in that corner already I thought it might be a good idea to build some kind of an angled shelf so laptops will be standing wide open from each side of the lamp balancing the shelf. 

This idea had two missing parts: the shelf and a clamp (bracket?) to hold it. Here you can download and print the second.  You will need some minimal woodworking skills to prepare the shelf which would insert into this clamp.

A bit more on sizes. I believe we have IKEA TÅGARP floor lamp which main pipe measured 15.5mm in diameter. I used 4 x 1/4-20 x 2-½ in bolts with nuts. Slot is made for 10mm-thick plywood. I finally used 12mm by mistake so had to use router to trim place for attachment a bit.

Prints took about 7h each part (with using 50% Gyroid infill).

Tagi