1 / 1
Bathroom Fan Interface for Nutone HB80RL
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Duct adapter for Nutone HB80RL fan with M3 insert mounts. Fits 3D-printed tubing.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This is a 3D-printable adapter plate for attaching ducting to the Nutone HB80RL bathroom exhaust fan (or similar models). I used it to install custom ducting for a Craft Room ventilation system.
The adapter includes:
- A circular outlet for connecting to 3D-printed or flexible ducting
- Mounting holes intended for M3 heat-set inserts
- Recesses sized for a small socket wrench to help with installation
Notes on installation:
- The fit is okay, but clearance might be a bit loose, depending on your printer and material.
- You may want to use sealant or tape for an airtight connection.
- Installation can be a bit tricky — I stacked 3 nuts and used a socket wrench to position them vertically through the access holes. The geometry allows for a small socket to fit, but it's still a confined space.
- I don’t know exactly what nuts I used — I got lucky with a random batch of imperial nuts I had lying around.
Disclaimer: Nutone is a registered trademark of its respective owner. This is a third-party, user-designed part with no official affiliation.