1 / 3
Detroit Pistons Magnet (Low Waste)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed in Hueforge for low filament waste & color swaps
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Detroit Pistons Magnet - 3D Print
Show off your team pride with this Detroit Pistons magnet! This 3D print uses three filament swaps to create a clean, layered design—no painting needed. It includes a recessed 8x3mm magnet slot on the back (easily resizable), making it easy to display on any fridge, locker, or toolbox.
🔥 Print Details:
- Size: 100 x100 mm
- 100% infill, 0.2mm layer height
- Depth: 5.4mm
- Filament Usage: 23.53g
- Print Time: 52m
- Three filament swaps, lower waste & wear
- No ironing required
⚠ Filament Tips:
- Basic Gray is used for the rim, but it can be swapped for Light Gray or left out entirely if preferred.
🎨 Filament Swaps & Layers:
- Start with Red
- At layer #19 (3.8mm), swap to Blue
- At layer #22 (4.4mm), swap to Gray (optional rim)
- At layer #24 (4.8mm), swap to Ivory White for the rest
🎨 Required Filaments & Transmission Distances (TDs):
- PLA BambuLab Basic Red – TD: 4
- PLA BambuLab Basic Blue – TD: 3.5
- PLA BambuLab Basic Gray – TD: 0.9 (rim, optional)
- PLA BambuLab Matte Ivory White – TD: 3.5
🏀 Designed in Hueforge, this print keeps filament waste low while delivering a bold, clean look for any Pistons fan!