1 / 3
Detroit Pistons Magnet (Low Waste)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed in Hueforge for low filament waste & color swaps
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 23
- Makes
- 0
- Views
- 66
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Detroit Pistons Magnet - 3D Print
Show off your team pride with this Detroit Pistons magnet! This 3D print uses three filament swaps to create a clean, layered design—no painting needed. It includes a recessed 8x3mm magnet slot on the back (easily resizable), making it easy to display on any fridge, locker, or toolbox.
🔥 Print Details:
- Size: 100 x100 mm
- 100% infill, 0.2mm layer height
- Depth: 5.4mm
- Filament Usage: 23.53g
- Print Time: 52m
- Three filament swaps, lower waste & wear
- No ironing required
⚠ Filament Tips:
- Basic Gray is used for the rim, but it can be swapped for Light Gray or left out entirely if preferred.
🎨 Filament Swaps & Layers:
- Start with Red
- At layer #19 (3.8mm), swap to Blue
- At layer #22 (4.4mm), swap to Gray (optional rim)
- At layer #24 (4.8mm), swap to Ivory White for the rest
🎨 Required Filaments & Transmission Distances (TDs):
- PLA BambuLab Basic Red – TD: 4
- PLA BambuLab Basic Blue – TD: 3.5
- PLA BambuLab Basic Gray – TD: 0.9 (rim, optional)
- PLA BambuLab Matte Ivory White – TD: 3.5
🏀 Designed in Hueforge, this print keeps filament waste low while delivering a bold, clean look for any Pistons fan!