1 / 2
Two AirMini hose adapters 22mm male and female — zdjęcie 1
1 / 2

Two AirMini hose adapters 22mm male and female

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

AirMini hose adapters that has correct snap feature that does not damage the tube connector like many models I found do.

Ocena
0 / 5
Polubienia
6
Pobrania
69
Wydruki
0
Wyświetlenia
244
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The two hose adapters attach to the Air Mini hose connector - with a snap.

One is to connect to any mask (without humidifier) and the another is to connect to another hose, for example to a sound damper or similar…

I printed the parts with ABS with 0.2 layers (PETG might be okay too - PLA not recommended), support are needed, temp 245 and 0.4 nozzle. Make sure your printer is well calibrated. The support for flanges need to be fine with 0.1 mm interface. Print the parts main orifice down so only the three flanges need supports. (0.16 mm layers might give more optimized result)

I have added cad models for you to edit for your liking.

NOTE: The model cad/stl is optimized for ABS shrinkage, no scaling needed if printed in ABS, other filament types - print and test.

USE WITH YOUR OWN RISK

Tagi