IKEA Sigfinn simple phone stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very simple phone stand that I modeled as an exercise using a real life IKEA Sigfinn as a reference.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 603
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
I wanted to practice using Fusion 360 so I tried to measure and model an IKEA Sigfinn as an exercise. Here are the fruits of my labor!
This simple phone stand is universal and will probably fit pretty much every phone. It features a little hole where the phone rests so that it can be charged while being on the stand.
For MINI(+) users: as a fellow owner of a MINI I could not print the full-sized version so I made an 80% version as well.
Layer height: 0.2mm
Supports: Yes (for angles under 40 degrees)
Infill: 10%
Material: PLA, PETG, anything non-flexible
NOTE: As the original long part of the Sigfinn is curved on both sides it was impossible to put it flat on the build plate. I flattened it (without sacrificing any functionality) for easier printing.