50A Receptacle Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Large plate/cover for Leviton 50A EV heavy-duty receptacle to fit 4.5" box.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
Large plate/cover designed to work with Leviton 50A EV Charging Receptacle in a larger 4.5" box. This cover is 5.25" wide, but you can adjust for yourself.
I used Polycarbonate filament as it has high temperature tolerance (over 120°C) and other receptacle plates are typically made of the same.
This design will be featured on Cheese MAKE by Roman Dmitri channel on YouTube:
https://youtube.com/@cheese-make
Components
- Rear support bracket
- Install this to the box first.
- Works in vertical or horizontal orientation.
- Use 2" machine screws with flat head.
- Front panel
- Install second.
- This hides bracket screws and holds plug in place.
- Use ¾" machine screws.
Disclaimer
I am NOT a qualified electrician. This is a DIY project, and electrical work should be done with caution and proper knowledge of local codes.