Liczymy pasujące modele…
Die goldene Desert Eagle ist eine ikonische Handfeuerwaffe, die in dem Film "Deadpool & Wolverine" verwendet wird. Diese mächtige Pistole, bekannt für ihre beeindruckende Größe und Durchschlagskraft, ist ein Symbol für Stärke und…
My girlfriend wanted a pink Desert Eagle in memory of our Counter-Strike:Source playing times... ...as there was no good looking models out there i had to make one myself. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No…
I've been looking for a prop of Deadpool's (or should I say Nicepool) gold plated Desert Eagles (from the Deadpool & Wolverine movie) to no avail. Then I stumbled onto WorstCat's very detailed model on thingiverse and thought it might…
Spare parts roller of LG Magic Remote AN-MR650A - works well small part of code wheel may require sanding depending on print accuracy
These files are Dust Covers / Caps for standard 50A Red / Grey Anderson Plugs. I've just printed one and it fits both the grey and red plugs pretty snug. Print settings are below, 0.3mm resolution worked well with ABS plastic. Did not…
50A Anderson plug flat mount cover needed on for camping
A screw mountable Anderson Plug Weather Cover for caravans and outdoor applications. Available for 1, 2, or 3 Anderson Plugs to be mounted with 4 screws in the mounting holes. Can also be siliconed along the interacting face for a better…
Took measurements of a 50A connector and basically remade it with divets instead of pins and a small ramp on the inside to make disconnection a bit easier on the plastic. It fits quite tight in there, about as tight as another connector…
Template for mounting plate for ZyXEL routers: [NWA50AX] https://www.zyxel.com/global/en/products/wireless/80211ax-wifi-6-dual-radio-poe-access-point-nwa50ax [NWA90AX]…
Category: 3D Printing
I have an old set of Lego trains with a 12V train motor. https://www.bricklink.com/v2/catalog/catalogitem.page?S=722-2#T=S&O={%22iconly%22:0} There was rubber rings on the wheels to make good contact and friction but it is not a surprise…
A flush mounting bracket for a recessed 50A Anderson connector for mounting into trims and panels.
Disclaimer: Electrical work shall only be performed by a qualified professional. Note: 4 different designs available. I was unhappy with how the current clamps for my Shelly EM were just “hanging around” in my fuse box. So I created this…
Rotate it…. or you will need supports. :) Printed mine in PLA.
Design for a friction fit cover for the Blue Sea Systems 250A Bus Bar Cover. Can most likely fit other bus bars and terminal blocks as well. Covers 5/16' studs…
Hello everyone; Some time ago, I bought a Noco Boost device, but it only came with a bag for storage. I always found this very impractical for storing in the car. That's why I have now designed a practical toolbox for it. The booster fits…
Box: https://www.distrelec.de/de/robustes-scharniergehaeuse-x8-110x260x100mm-grau-transparent-abs-ip66-ip67-camdenboss-chdx8-322c/p/30113298 Heatsink: 150x13x100 must cut to 150x13x66 150*13*100/200/300mm Aluminium Kühlkörper Kühler…
For model AN-MR650A . Wife said, this looks like a Barbie toilet ;-) Have fun…
Zyxel Cloud WiFi6 AX1800 halter für Tisch
Adhesive assembly required. .step included. Remix If you want to use it as a template for your own mount, try looking at https://www.printables.com/model/341266-step-zyxel-nwa50ax-nwa90ax-nwa110ax-mount-plate-te Slicing guide: Enable…
For mounting you need: 3x M3 x D5 x L4 Thread inserts 3x M3x22mm ( You can also use shorter screws, but they should be between 15 and 22mm long. I recommend using longer screws for leverage, the full metal version weighs 1.4 KG ) It is…
The remix fits the Meanwell RD-50A which hast two more screw terminals. This cover should only be a temporary measure until the power supply can be installed in a proper case. You are still playing around with mains voltage so be careful!…
The goal was to keep the original placement of the receiver box and provides an addition 10mm clearance for the larger 4274 motor. BOM m3x20 2 m3x30 2 5x3mm foam m3 inserts 6 Print Support: Yes Material: PLA
The hood prop holder snapped on my Jeep Patriot, and I didn't feel like paying 18 CAD for a cheap injection moulded plastic part just because it was “genuine”, so of to Onshape I went. It took a few iterations to make it snap without much…
model provided to me by spintend, thanks amy
A mount for a 50A Ideal Diode that will allow current to flow in one direction. Handy for solar and battery projects. Modules where found on Ebay and AliExpress.
I use Octoprint ( OctoPrint.org ) in combination with OctoRelay ( OctoRelay ) to control the lighting and heating/fan of my 3D printer housing from TUKKARI. Over time, the 4-channel LM2596 DC board with 3.3V, 5V, and 12V (part of my…
This is a complete enclosure for an ICEpower 50ASX2SE Class D Audio Amplifier module, a 50W stereo amplifier (45W/channel 4 ohms) board made by the Danish company Bang and Olufsen. (Not to be confused with some of the far east "50W"…
Prop Magazine for .50ae no internal parts Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: .10mm Infill: 100 Notes: HATCHBOX 3D PLA Orange 1.75mm Scaled down to 99% for better fit Category: Props
I have a MiSTer FPGA and an iPad CRT . They both use different voltages to run(5V and 12V). I have a small amount of plugs at my desk and I absolutely loathe wall wart powers supplies. I stumbled upon the MeanWell RD-50A . It provides…
Model provided to me by Spintend - Includes both the Vertical Phase Wires and Parallel Phase Wires configurations of the Ubox 85v single VESC controller. Controller heights match the specifications from their website. Thank you, Amy!
Printed this out of PLA. No brim or supports needed.
I picked up an ISDT BattGo BG-8S Battery meter and wanted a way to mount it on the battery so I designed a case for it. This is meant for a SLM24 LIFEPO4 24V 50A 8S 1200WH BATTERY from JAG35.com…
Shift bezel for a 1979-1980 manual RX-7. You will need a new shifter boot that is of sufficient size for this. I made my own and can upload the templates a bit later once I finish tweaking them. To assemble you will need 12 M3 heat press…
These old Porter Cable nose cushions eventually just crumble. They do sell replacement parts online, but they are pretty pricey for a simple part. There was one other model on here that was a replacement for the very similar nailers…
This is designed to allow LiTime 50Ah batteries to stack on top of each other as well as protect the terminal. It's a bit overkill if you are only trying to protect the terminals, my TPU Battery Cable Boots would be better for that. If…
A small holder/case for Sony MDRXB50AP/R Extra Bass Earbuds. Keeps cable from being easily tangled when carrying around. To wrap headphones around I find if you start with the aux end at the back and start wrapping around it works best. I…
About Mean Well RD-50A terminal cover done from scratch. On the photos there is a version without an additional mount hole to the right because I do not use it, also quick ugly print, but usable. Please give a like and post makes and…
I recently acquired a pair of EnGenius EWS850AP outdoor access points off an auction site. Unfortunately, they did not come with the original (metal) mounting brackets. Not to worry, I have OpenSCAD! (This bracket also fits the…
For details see differences of the remix to the original. In addition there is a lanyard loop at one side. I have uploaded 2 models, one with holes at the back for 10mm2 wires (6 mm diameter) and one without. Best print with FLEX or TPU…
These Ideal Diodes work just like a diode, but have practically no voltage drop. Prefect for battery protection and solar panel projects. You can get them here: 50A Solar Panel Battery Charging Anti Reverse Irrigation Protection Ideal…
I made this mount specifically for attaching a 50A plug converter to the series 40 extrusion in my van. The mount uses the general t-clip system for skadis but with a custom “clip” that works with series 40 extrusion. For other clip…
Edit 2025-03-08: After a few weeks I decided I wanted a closer shave so I've added a version 2 (V2) that shortens the tines, adds more tines, and moves them closer to the blade. It also rounds the face-interface and adds a thumb-push to…
Description Large plate/cover designed to work with Leviton 50A EV Charging Receptacle in a larger 4.5" box. This cover is 5.25" wide, but you can adjust for yourself. I used Polycarbonate filament as it has high temperature tolerance…
German: Das originale Antriebsrad oder Antriebsritzel sah nicht sonderlich stabil aus und es ist nach nur einige Male nach der Benutzung gebrochen. Da das Modell nicht mehr vertrieben wird (Jahrgang 2018) habe ich es kurzerhand mit…
This needs to be printed in something heat resistant like PETG or ABS, PLA will most likely deform due to heat from the ESC. Glue the fan cover on the upper casing with CA glue. Use the 4 standard small screws from the old case to fit the…
Isolation cap for battery terminal 150A
Simple plate to cover a 50A power supply. Drill holes on the right side as needed. I zip-tied the front side of the plate to the printer frame. This is an Anet A8 Prusa i3. The width of the power supply is about 120mm. You can find the…
When converting a Ryobi RM480e electric riding lawn mower from lead acid to lithium, it's important that the new battery pack be securely mounted. ( UPDATE : I'm told these brackets will fit only the 75 AHr model [ RM480e ], not the 100…
Want to cover up the back of the speaker, this will do the job. Needs to be printed in an angle since it is taller than my mk2.5s max height, so built in support has been designed on to it and it can be easily snapped off after printing.…
Use TPU 95a 100% infill ***Update the first design didn't last long I have uploaded a new one that lasts a lot longer
This is a mount for the vesc controller https://cad.onshape.com/documents/d5ca45786ce166b6a65e9056/w/74cd2b6ca612b579a78
krabička pro kontroller z aliexpressu s LCD 50A . Dva závity M3 je nutno proříznout do plastu . Kryt na kabely/výfuk jsou dvě varianty . možno použít i držák na 3x3000F superkondenzátor 60mm průměr . Držáky jsou k sobě smontovýny m3…
A beautiful round flower vase; for decorative purposes to hold artificial flowers, or anything else. It is 190mm tall and 122mm wide. The photo shows the vase printed in vase mode, which prints a single wall. It can be printed in vase…
Shift bezel for a 1979-1980 manual RX-7. You will need a new shifter boot that is of sufficient size for this. I made my own and can upload the templates a bit later once I finish tweaking them. To assemble you will need 12 M3 heat press…
Gridfinity 5x5x6u for UNI-T UT50A multi meter. Including space for accessories. Accessories pictured are the Proster PST175 Multi Test Leads Kit. Enjoy!
A small holder/case for Sony MDRXB50AP/R Extra Bass Earbuds. Keeps cable from being easily tangled when carrying around. To wrap headphones around I find if you start with the aux end at the back and start wrapping around it works best. I…
Freecad file contains 2 models, original → as close as possible to original as I could measure some of smaller hole sizes might be wrong as they were hard to measure, also the draft angles were ignored, and second model → optimized for…
A cover covering industrial PSU into Lab/safe tool. includes banana, XT60 and EC5 connection options
GWL/POWER DC Switch ZJK250 - 250A, 48V wall holder https://shop.gwl.eu/Battery-Management/DC-Switch-ZJK250-250A-48V.html Category: Electronics
The counter-sunk screw holes are designed with #6 screws in mind.
the rubber part that hold the upper bushing on my old tower fan "SHARPER IMAGE" Model : FZ25-50A2 disintegrated with the years and will make noise and not work, this fan was build good to last , so i replicated the original part , printed…
Newmar New Aire 50A Passthrough Enclosure. OEM weatherstripping solution is fragile and easily tears. Printed in TPU.
I printed it in PETG, 4 Walls for better strength / durability. Aligns with the factory holes.
A beautiful round flower vase; for decorative purposes to hold artificial flowers, or anything else. It is 190mm tall and 122mm wide. The photo shows the vase printed in vase mode, which prints a single wall. It can be printed in vase…
Gridfinity 5x5x6u for UNI-T UT50A multi meter. Including space for accessories. Accessories pictured are the Proster PST175 Multi Test Leads Kit. Enjoy!
Arrma 223s ESC mount adaptor for Spectrum 150A ESC
A very simple case / container for a 14250A or AA battery. There are two lid-types. One with a single exit hole (for batteries with insulated wires that can pass through one hole), and another with two exit holes. It's pretty…
The bottom face will be your show piece, so make it neat! There are slots to allow a bit of tolerance for the wire and crimping process, it can be held together with 4xM4 bolts and 4xM4 nuts 2 Plates are required for both sides (Details…
To construct the case, the battery is placed into the print near the end (at layer 383 when using a 0.2mm layer height), and the print is then resumed, fully encasing the battery. The weight of the print is 6 grams, bringing the combined…
This is a Cover for the ESP32Cam and 18650Akku together. It offers easy access to card in/out, power switch and mini-USB for loading the akku. This device is designed for time lapse (based on bitlunis camtimelapse ), the preparation and…
I made A 50A Anderson plug Curved mount cover for my ARB canopy
BNC_50AD Nose cone (Used on the Fliskits Stingray)
A remix of a 50A Anderson Plug cap that requires no support and has a hole for a tether to allow it to be attached to the Anderson plug when not in use. I did not need glue to get the pins to stay in the cap body, but depending on the…
My little 1 Gallon Shop-Vac MC150A had no hose (4 ft x 1.25 inch hose pn#90564), so I made an adapter to use my Big Shop-Vac Hose on the little one. Works very well. This makes 2 ½ inch hose fit into 1 ¼ inch receptacle.
I needed an osVAC vaccum adapter for the Fanzwork EZ150A Orbital Sander and didn't find any fitting ones which used the original pipe delivered with the sander.
Ultralight cover for Vapcell 2150A 5000mAh powerbank. It blocks the positive and negative contacts of the battery leaving only USB-C connection available for backpacking use. Only weighting 3 grams total! It is printed as two separate…
I have a supergun that I use to power some arcade hardware I own. These superguns need 5V, 12V, and -5V power to operate. The MeanWell RT-50A provides all three. This case is just a shell for this PSU so I can switch it on and off and not…
Magazine extension for the Helljumper Kit from Cobalt Designs. Extends the stock magazine for the HC Diana to 15 rounds. Print oriented vertically. Use at least 2 walls, 15% infill. Recommended for PLA+ or stronger materials.
Note: The enclosure is 243mm long which fits Bambulab P1P/P1S/X1C and should fit Prusa MK3S+/MK4 or similar but not smaller printers such as Bambulab A1 or Prusa Mini. I made it a single (long) print to simplify the design. Printing Tips…
