1 / 4
80mm Fan Exhaust Adapter—Connect to Standard 4" Vent Hose (Easy Upgrade) — zdjęcie 1
1 / 4

80mm Fan Exhaust Adapter—Connect to Standard 4" Vent Hose (Easy Upgrade)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Connector for 80mm to 101mm (4") flexible pipe

Ocena
0 / 5
Polubienia
4
Pobrania
76
Wydruki
1
Wyświetlenia
345
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Many printer or laser enclosures use an 80mm fan for exhaust, but often require an adapter on the outside to connect to a flexible exhaust pipe. Flexible 3-inch pipes tend to be more expensive and harder to source than standard 4-inch (101mm) pipes, which are widely available and more affordable.

By using this adapter, you can connect a 4-inch flexible pipe to your 80mm fan, saving cost and improving accessibility. Alternatively, you could buy a pre-made kit, but since I already had a spare fan, I only needed to print the adapter and purchase the flexible pipe.

I printed the adapter in ABS using standard settings, though PLA would also work well.

I hope this helps with your enclosure ventilation setup.

Tagi