80mm Fan Exhaust Adapter—Connect to Standard 4" Vent Hose (Easy Upgrade)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Connector for 80mm to 101mm (4") flexible pipe
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 75
- Makes
- 1
- Views
- 339
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Many printer or laser enclosures use an 80mm fan for exhaust, but often require an adapter on the outside to connect to a flexible exhaust pipe. Flexible 3-inch pipes tend to be more expensive and harder to source than standard 4-inch (101mm) pipes, which are widely available and more affordable.
By using this adapter, you can connect a 4-inch flexible pipe to your 80mm fan, saving cost and improving accessibility. Alternatively, you could buy a pre-made kit, but since I already had a spare fan, I only needed to print the adapter and purchase the flexible pipe.
I printed the adapter in ABS using standard settings, though PLA would also work well.
I hope this helps with your enclosure ventilation setup.