Brush Wall Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Need to run some random cables through the wall but want it to somehow still look like you are a civilized adult?
- Ocena
- 5 / 5
- Polubienia
- 159
- Pobrania
- 257
- Wydruki
- 1
- Wyświetlenia
- 3795
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Need to run some random cables through the wall but want it to somehow still look like you are a civilized adult? The Universal Cable Outlet Cover will allow you to do just that! This three part outlet cover simply snaps together and includes flexible whiskers… because… yes!
Unique Feature - This cover includes a flexible slit on one side that allows the cables to quickly be added or removed when installing or removing the cover.
HARDWARE: (Either)
• Low Voltage 1 Gang Bracket - Amazon | Print (by Riskable)
• Outlet Screws 6-32, 1 inch
• Screwdriver
• Painting Tape
• Multi-Tool, saw, or rotary tool ( for cutting wall)
PRINT INSTRUCTIONS
• Trace the outsize of the low voltage bracket and cut a hole in the wall, I recommend placing painting tape on the wall to trace on and to cut through to protect the surface.
• Install the Low voltage bracket.
• Snap together the three layers of the outlet cover.
• Using the 6-32, 1inch Outlet screws install the Universal Cable Outlet Cover.
PRINT SETTINGS:
Filament: Faceplate and Backer PETG or PLA | Whiskers use TPU
Nozzle Size: 0.4mm
Print Height: 0.2-0.35mm
Infill: 10-20%