Kingroon KP3S inexpensive hotend upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bambu TZ clone hotend and BMG clone extruder on KP3S 3.0, Pro and S1.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 1039
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
An inexpensive full upgrade of the hotend with less than $20 total cost for Kingroon KP3S 3.0, Pro and S1.
It's based on TZ Bambu clone hotend with V6 adapter and BMG clone dual gear extruder, but stock Titan can be used.
Remember the BMG need Marlin recompilation with extruder motor inverted. Not needed for Titan.
The whole system can suppot printing speed of ≥250mm/s. This little printer can go faaaast.
It's composed of fan shroud, adapter for 3010 to 2510 fan mount, semi-circular fan duct.
You will need:
- TZ Bambu clone hotend complete with thermistor and heat cartridge. You can choose for 2.0, 3.0 copper, and 4.0 with rapid change nozzle,
- Bambu to V6 hotend adapter,
- BMG dual gear original or clone extruder.
- Optionally a BL/3D Touch, holes for M3 6-10mm are provided into the shroud.
If you choose for TZ Bambu 2.0 or 3.0 you can use CHT nozzles for this setup.