Neptune 4 plus motherboard fan mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows to position the fan correctly without the bottom plate, and have a bigger fan
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 413
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
What purpose does it serve?
If you have to permanently remove the bottom cover of your printer you can still keep the fan in the correct position to cool the mcu and stepper drivers. This mod also allows you to have a bigger fan to cool the mainboard. Just make sure that it's ≥10mm thick.
For now only tested on Neptune 4 Plus, it could work for other machines if the mainboard is placed similarly to the center extrusions.
BOM:
M3x10mm BHCS | 2 |
M3x12mm BHCS (for 8010) | 2 |
M3x4.5x5mm Heat insert (8010) | 2 |
T-nut that twists in (print) | 2 |
Installation
Put two heat inserts into the holes of the fans (make sure that the heat insert size matches the hole of the fan). Assemble like seen in the picture
Submit feature requests here!