1 / 6
HORIZONTAL Print _ ANGLED Talon Short Dart Magazine _ (15/12/10/8) — zdjęcie 1
1 / 6

HORIZONTAL Print _ ANGLED Talon Short Dart Magazine _ (15/12/10/8)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

ANGLED Talon mag which can be printed horizontally. This is more stable and does not cause those scratching noises.

Ocena
5 / 5
Polubienia
82
Pobrania
333
Wydruki
4
Wyświetlenia
1286
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

HORIZONTAL Print _ ANGLED Talon (compatible) Short Dart Magazine
___ 15, 12, 10 and 8 darts ___

 

Horizontal printed mags slide smoother, get stuck less, and sound quieter when loading/unloading.
 

A big advantage of this is the print direction of the feed lips, which makes them much more difficult to break when printed horizontally.


DO NOT use supports inside the magazine !!!
(use support blocker there)
 

Keep an eye on the result of the bridging inside the magazine. If there are any messy spots, you will need to rework them a little with a small file.

  • Update 26.6.2026:
    Added a version for drum springs with a capacity of 15 darts.

    Added a matching follower for drum springs.


Click here for some more HORIZONTAL PRINT magazines for short darts

-----------------------------------------------------------------------------------------------------------------------------

The files are already pre-oriented.

My print settings for PLA:
0,2mm layer height
4 walls
8 top and bottom shell layers
20% gyroid or cubic infill
Tree supports on feed lips and back notch facing the print bed


Thanks to Taffert Designs for the files I could use for this Remix.

Tagi