Umbilical CANBUS cable bridge mounts for Stealthburner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These CANBUS mounts use a 0.5mm or 0.64mm rod. These will allow full unrestricted movement with a raised chamber height.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 324
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These CANBUS mounts use a 0.5mm or 0.64mm rod. I used a 0.50 mm rod but I may change it to 0.64 mm to remove a little of the lean :-) These will allow full unrestricted movement with a raised chamber height. The cable bridge is a modded BTT model allowing a more secure cable path and management at the toolhead. Here is a well sealed efficient Tophat that I have nicknamed an Ascot: https://www.printables.com/model/1278871-voron-ascot-aka-top-hat-all-the-umbilical-height-i . This style of a raised chamber height still provides a full clear unobstructed view into the build chamber. I encourage you to try it out.
You may also be interested in my other Voron Trident mods shown here or at https://www.printables.com/@JimChristian_3198049 & https://www.printables.com/@JimChristian_3198049/models They work well :-)
Also, if you find value in this, please give it a like. Thanks.