Umbilical CANBUS cable bridge mounts for Stealthburner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These CANBUS mounts use a 0.5mm or 0.64mm rod. These will allow full unrestricted movement with a raised chamber height.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 56
- Makes
- 0
- Views
- 325
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These CANBUS mounts use a 0.5mm or 0.64mm rod. I used a 0.50 mm rod but I may change it to 0.64 mm to remove a little of the lean :-) These will allow full unrestricted movement with a raised chamber height. The cable bridge is a modded BTT model allowing a more secure cable path and management at the toolhead. Here is a well sealed efficient Tophat that I have nicknamed an Ascot: https://www.printables.com/model/1278871-voron-ascot-aka-top-hat-all-the-umbilical-height-i . This style of a raised chamber height still provides a full clear unobstructed view into the build chamber. I encourage you to try it out.
You may also be interested in my other Voron Trident mods shown here or at https://www.printables.com/@JimChristian_3198049 & https://www.printables.com/@JimChristian_3198049/models They work well :-)
Also, if you find value in this, please give it a like. Thanks.