1 / 9
Mandalorian Grav Charge/Bomb (Sticks to metal!)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Super cool Grav Charge from the Mandalorian TV show! Modeled to look just like the one in the show.
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 162
- Wydruki
- 2
- Wyświetlenia
- 720
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 9)Remiksy (0)Kolekcje (52)Powiązane
Super cool Grav Charge from the Mandalorian TV show! Modeled to look just like the one in the show.
If you need a different magnet size let me know and I will make it for you.
Print Settings:
If you are putting a magnet in it, make sure to have low infill percentage so that it will be light enough to stick to metal. For the red dot I recommend printing it at an angle above 45 degrees so that you don't have any top layering.
| Resolution : | 0.2 | Supports | NO |
| Infill : | 10% | Brim: | NO |
| Material: | PLA | Filament Color: | Silver |
More designs


