Liczymy pasujące modele…
This easy-to-print broom holder uses a rolling gear and the broom's own weight to securely clamp it in place. Just lift the handle slightly as you push it in place to lift the gear, and then let it settle back down to lock in place. To…
Print, assemble and play directly, no screws needed 8-11
Based on a popular model seen on TikTok, this fidget toy's files have been very difficult to find. So, I made it myself. Included in the files are a short, 30mm bladed version similar to the ones seen on TikTok, as well as a longer 50mm…
I also hopped on the 3D printed gravity knife craze, I just designed mine with a slightly different approach. The handle is slightly redesigned version of the beautiful Carrot Gravity Toy Knife remix made by Chris Klepel . Have you…
Support me & Join Printables Club This is a spoolholder modification for MMU2S. For auto rewinding filament spools are using gravity. UPDATE: For those who do not have original bases, I added a modified printable base. And source STEP…
Original files from the video as seen on TikTok! credit to https://space.bilibili.com/11381512 To connect the blade to the housing I used an M3x16 screw and a nut with pin set V1. You could also superglue it in with pin set V2 if you…
A major capacity upgrade for your egg storage: This is a Double-Track Remix of the popular egg dispenser. Based on the concept of a single gravity-feed egg trough, this design doubles the number of tracks, allowing you to store and…
Originally the remix of the ingenious Car Vent Gravity Phone Holder by Abdel Darwish that in the version V3 I remodeled from the scratch, keeping the original idea and general outline. Main changes in V4 (2025-07-26) Changed parts : Arm…
These spacers are easy to print do not require supports or any glue. Don't have a 3d printer but still want these spacers? DE: https://www.megahobby-kugelbahn.de/ * Also want to sell my models? send me a message Updates 2-1-2023 Made the…
Gravity knife fidget toy to keep your hands occupied. Updated with a safe blade and two comb blades. Assembly: The Peg should be printed two times. All the tiny blobs or other printing defects should be removed if any. BaseBottom and…
Leave a Like or a Make to support me ;) Improvements: -clampable clip with different dimensions (depending on the ventilation grille, see pic) -reinforced backplate -attachment points changed to be able to grip even large smartphones The…
--If this piques your interest, you should definitely check out V2-- Discover the ultimate in fidgeting fun with my free 3D printed gravity knife fidget toy. Engineered to print in place without any supports on an FDM printer, this…
Inspired by the Reate Exo-U i did my own attempt on a grivity knife. This might be work in progress, so possible that there will be further versions. My original Design is for use with M2x2 heat inserts, but i also added a version for M2…
The original size was a little small for hand holding, so the overall length was extended. Please be careful not to injury. -Update- I have made an update to add a small edge to the shape to allow for better finger hooking. There is no…
Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…
Version 2 Available 💊 Ultimate Weekly Pill Organizer & Dispenser (Gravity Cascade System) 💊 Looking for a smart, functional, and stylish way to manage your daily supplements and medications? This Weekly Pill Organizer features an…
I printed this for my son, beautiful print, but wanted one for myself. I made it 15mm longer so it fit my hand better. Make sure to paint the seam on the blade down at the bottom where you won't see it. 👍
Check out my new Toy Switchblade design here . This is my gravity utility knife design. I also made a toy blade if you just want to use it as a fidget toy. If you enjoy the design a like or make would be appreciated. Check out my new…
I found a couple of rails here on thingiverse but wasn't satisfied with the performance results when building a track with it. Therefore I designed my own rails from scratch, including a 4 and 5 tile overspan. Check those YouTube movies…
Used a (slightly inaccurate but cooler-looking) Unitology font to inscribe the Marker from Dead Space. I've seen various paid models on other sites that use the inferior game rip version of the marker and are full of holes in the mesh.…
This knife is a figet toy from Tik tok, without any sharp corners Project came with 4 files; grip, blade, shell & 2 pins Check me on my YouTube: https://www.youtube.com/channel/UCkqbUzyZ5GKdea3Zdf6kEnA?app=desktop
I saw this type of wine stand a few days ago but could only find it made of wood, so I decided to design my own. I printed several until I found one that fit most of the bottles I had, printed quickly, and was sturdy. I incorporated a…
For all of your fidgeting needs. You will need: Direct pin shaft1x10 Diameter x Length(It is recommended to add spare parts) Direct pin shaft 2x8 x1 Direct pin shaft2x20 x3 Direct pin shaft 2.5x8 x1 Direct pin shaft2.5x18 X2 Direct pin…
This is a 40mm sized remix of the gravity knife fidget toy. I found the original 30mm version to be a little too short, and the 50mm a little too long. I removed a 10mm section from the middle of the 50mm version. Open “Gravity Knife 50mm…
These spacers are easy to print do not require supports or any glue. They are a remix from Matthijz98 done in PrusaSlicer and reexported as STL. Since they fit tight with themselves and original tiles I wanted to have some smaller ones as…
How it works: Push skis in and up to allow for one handed operation (Strongest holding power at the thinnest point of the skis right where rocker starts) (Gif of older version, but use is the same) Changes: 12/29/23: Added new bolt…
Tired of flimsy phone mounts that sag, wobble, or require metal hardware? Meet the ultimate heavy-duty, 100% 3D-printable modular arm station. Combining a premium smart gravity-locking holder, an engineering-truss articulated arm, and a…
All these tiles can be used with the original Gravitrax. The tile are created with higher wall great for high speed applications. The tiles are printed in two parts and need a drip of glue to work, but no support. v2 Updated all the tiles…
update 5th of April Finally, the highly anticipated update to the base tile! The two part improvement was easier to print, but needed glue for good usability. I have been looking for a better solution for a long time and I think I have…
Gravitrax compatible bridge for multilayer tracks without supports
"It's a deal!" Bill Cipher was a triangular dream demon, formerly existent only in the mindscape before succeeding in gaining access to the real world. He had been running amok in Gravity Falls, Oregon since being summoned by Stanford…
16 different insets which can be used with my basic tile. Update 8th of February 2022 added two new insets as requested by an excited user of my design ;) (1 straight, 1 long corner & 1 straight, 2 long corners) Pick the ones which you…
Harlowe is a former Maliwan combat scientist, driven by the need to understand how things work. While this initially made her an outcast amongst her Traunt relatives, Harlowe has used her intellect to bring new tech and gadgetry to the…
Remake : Damon Cui's remix Original : DaFizzlesz I made a different model from the original version.
Tired of phone stands that sag under the weight of an Ultra or Pro Max smartphone? This Gravity Desk Station is a heavy-duty, professional-grade solution designed for maximum stability and precision. It uses a smart mechanical linkage to…
I divided it into two parts for better printing, if you have trouble with the overhangs. You'll need a lot of power to get through: https://www.thingiverse.com/thing:4800097 helps, normal gauss won't work Video:…
Hang it. Hold it. Keep your broom within reach and clear up floor space. This wall-mounted gravity broom holder combines a compact honeycomb-inspired shape with a moving gripping wheel. The wheel moves along the toothed track to grip the…
Scenic tile! Add some travel destinations for your Gravitrax marbles with the addition of the Eiffel Tower pass through tile. My wife did one setup where she put this tile in the middle of a bunch of wavy slow rails and she called it the…
A very simple too for aligning your laser head (40mm x 40mm square diode laser modules) to your workpiece. It allows you to quickly establish the origin at the corners of your material without having to test fire your laser. Just butt the…
After taking heavy inspiration from other gravity knives desings, I decided to make my own fully printable version. With this design you don't need any extra hadware, you can just print all the parts, even all at the same time if you want…
Print settings: Rafts: No Supports: Yes Infill: 20 Material: PLA
This cupholder has a way better point of gravity for better functionality of the gyroscope. It should be mounted with common M5 screws and nuts, please use nuts with thread lock. There are also four space holders which should be mounted…
Hi, I always wanted an affordable, uncluttered and reliable mechanical pencil that I can always carry with me. This is the 3d printed solution I came up with. It's a simple mechanism, allowing you to adjust the length of the leads using…
Even more slightly improved Cat Water Bowl, with just added legs for stability. Thanks to mitchell_cj for the original model and minar for improved one. Print instructions Printer brand: Creality Printer: Ender 5 Rafts: No Supports: No…
This Tower is 140mm high and has an inner channel for balls. No print support structure needed. Thanks for download. 09/01/24 update outlet See video for demonstration:
A no clunk adaption of the wonderful "Gravity spoolholder for MMU2S" by Michal Fanta. Video: https://youtu.be/Li5INzZ04JA Many of the gravity rewinding spool holder allow the spool to continue spin at the top, by jumping over the gears…
These are straight rails for use with Gravitrax Print instructions Category: Mechanical Toys Summary These are straight rails for use with Gravitrax
Two kind of hammers for kicking the marbles up to speed in your marble run! The 13mm version uses normal Gravitrax steel balls. The 15mm version uses the larger 15mm steel balls which are also used for the Gravitrax scoop. I ordered both…
Check out my Amazon Page to see what kind of gear I use to make these models! VIDEO: https://www.youtube.com/watch?v=1YpuNLxkGPs Defy gravity with this awesome wine bottle holder! A classic woodworking project, now you can make one with…
This is my new Anti-Gravity Roller! Yes, it is right in the name! The roller rolls against gravity (At least it seems to until you look close enough) If you liked this model, check out my other illusion model: THIS IS THE LINK This is…
While many types of curved rails are available, I found that the types I wanted to use were rarely available and that many had very tight connections, making them difficult for me to use. Therefore, I decided to make my own. I also made…
Fünf auf einen Streich… Mit Stützstrucktur (nur für den Absatz unten) Standardmodell - ca. 33g (einfacher Druck) Lightmodell - ca. 23g (relativ großer Überhang, hat bei mir ohne zusätzliche Stützstruktur funktioniert)
Can grab from about 20mm to 37mm diameter, 10mm more range than the original model. Uses the same stock gear. The gear gets clipped in place before the Broom Holder is mounted on a wall. Once mounted the gear is completely captive. No…
Low Profile Honeycomb Pins for Laser Engravers by RebelTaz I have seen these hold down pins for laser engraver honeycomb beds everywhere, but the problem with all of them is that they stick up too far to be useful with "fixed focus"…
Gravitrax Höhenstein. Passt mit originalen Zusammen und hält stabil auf der Platte. Gedruckt aus PETG. Der Höhenstein sollte mit der eigentlichen Oberseite auf dem Druckbett gedruckt werden. Support auf dem Druckbett sollte aktiviert…
Just simple Gravity Karambit Knife Fidget Toy. Need 5 M3 12 bolts to assemble. Some glue for blade.
General Update how to support different Sculfun products / configurations: If your HoneyComb Board used is NOT the same size like mine: exactly 405 mm ( X-Axis ) by 405 mm ( Y-Axis ) mm we need to adopt the distancers. Measures and sizes…
My version of a high speed curve for Gravitrax, with a separate connector on the bottom that you can glue in. This makes it more easy to print. I added the Fusion 360 file if you want to use it as a base for your own creations. Category:…
This is a spacer to be used with the Gravitrax marble run system. It has been designed so that no support is needed. Various sizes have been provided for your convenience.
A funnel for Gravitrax that allows the ball to move slowly and smoothly. I've been working hard to add more practical entry points, and I'm really happy with how it's turned out. The entire funnel is held up by three rings attached to…
this amazingly fun addon for gravitrax adds a fun new twist to your existing tracks. it suddenly drops and then comes right back up, it incredibly satisfying & smooth!
This remix of the model by LoboCNC lengthens the depth and width of the holder (and also the gear) by 0.5in to accommodate tools with larger handle diameters.
You should check out my print in place version: https://www.printables.com/model/1215608-print-in-place-gravity-knife-v1 Due to its popularity on printables(There is already several remixes). I feel I should Reopload my gravity knife from…
This is a new extension for Gravitrax, well I haven't seen it so far although its quite simple. Needed: - Neodym Supermagnet ⌀ 10 x 5 mm - ⌀ 3 mm Pin ( a toothpick will work as well ) Just put the parts together like in the Video (I have…
🧢🧣Gravity Holder – Cleverly Held by Gravity!⚪ The Gravity Holder uses a freely moving ball that securely clamps objects in place using nothing but pure physics and gravity! Simply slide a towel, cap, or scarf between the holder and the…
AirTag Case, designed for flexible TPU printing! Some versions to choose from: AirTag keychain: smallest, easiest for smaller key rings. AirTag thin fob: Similar to Apple's leather designs. Ring goes across, co-planar with the print.…
This heart-shaped fidget sphere is a tactile desk toy made up of 10 interlocked pieces that slide freely using gravity. When held from one side, the remaining parts smoothly slide downward until they reach their limit, creating a…
A horizontal loop inset for the basic tile. Note; this design is ONLY compatible with my 6 exit basic tile. The basic tile is compatible with gravitrax. You’ll need this part to put the inset in:…
This is a quick jig i made to hold an AR15 level for engraving. It has been designed with mounting points 75mm on center to match an X-Carve CNC wasteboard. Two of the M5 thumbscrews are used to secure the jig, the third M5 thumbscrew…
This model is made as a part to teach students how to get into fusion workflow. Also how to be the part of printables community. Reimagined og figet toy.
A fun rail for gravitrax. The rail is a larger wobble rail. Designed in OnShape.
These bridges give some new possibilities and can help save some spacers. Al files can be printed without any supports
Print orientation and scale is as you see. Update 8/27 After some feedback, Adjustments have been made to the holder pins and Blade Holder. Now the blade slides in smoothly and the holder pin snaps together tightly, but not impossibly…
A remix of LoboCNC's Gravity Broom Holder , integrating 3 and 4 holders within a single block. For compact storage of multiple brooms or other tools, requiring fewer screws for mounting on the wall. Adjacent holders have been slightly…
Description This is a remixed and upgraded version of the original Gravity Broom Holder, made for smart and secure storage of tools, broomsticks, or garden gear with round handles. The system allows you to organize various handle sizes –…
I first designed the plate as one piece based on the original cardboard and then “cut” it into 4 different pieces in order to print it. Use the 4 files gravitrax_hexa_plate_top_left, gravitrax_hexa_plate_top_right,…
The spiral is modular . That means that there is a minimum set of required parts, and a few optional parts to increase the height, change the marble inlet, add stabilizer pillars etc. Marbles cannot fall out of the Spiral - no matter how…
This model is based on a gift my wife gave to me several years ago - a stainless steel gravity/grappling hook. )If you are interested you can find the stainless steel version on amazon here: https://a.co/d/5YDCH3A ) Gravity hooks can be…
An accesory to lift your Gravitrax-rails. Use the enclosed F3D.-File to scale the height to your needs. Contains files for: 1HU - original height 2HU 3HU 4HU 5HU 10HU Print instructions Print in PLA. No support needed.
This is the best thing I've ever made! I have ~20 scattered around my house, stuck to things ready to cut things open. It's a quick draw utility knife inspired by the TIKTOK GRAVITY KNIFE FIDGET TOY . I'd strongly suggest printing out the…
The double cone object rolls UP the ramp due to their physical properties. To learn how this works, watch my YouTube video explaining everything here as I designed this for that video :) Please heart this design if you like it as it helps…
This is a remix of Michael Fanta's original Gravity Spoolholder for MMU2S , which rolls the spool up a ramp while filament is being dispensed and takes up the slack when the filament is retracted by letting it roll back down the ramp.…
A printable shovel setup as a strainer for helping filter or scrape sand, clean gravel, and removing other larger waste items. This model has been design to be placed on the print bed at a 45 degree angle (as the STL is oriented), and can…
Do you DARE summon the dead? how about some Demons? Here are the files for my Haunted Gravestone It is sized to suit an old Motorola G4 that we had going to waste in a drawer. The G4 is quite a large handset so slightly smaller ones could…
Power Cannon for GraviTrax by uhltimate This is my Gravitrax compatible "Power Cannon". It is easy to reload and has more power to gain height. You can print it without using supports. There a two different designs. Power-Cannon, same…
A clamp for holding down wood or other material on the honeycomb bed for an Atomstack laser cutter. It may work on other beds but it was specifically designed for the Atomstack bed and fits very snugly. You can scale it down slightly if…
This is a catcher for your Gravitrax catapult. Use it together with the original Gravitrax base stone. The special thing about this catcher is that you can use the inset to choose which exit the ball should take. Tip: Glue the funnel into…
I had two design goals. First a fast print. And second in one piece without support. For the last goal the inner plate was skipped. AFAIK this surface isn't necessary in any condition. The spacer is still stiff. Even more, now a marble…
The stones are as high as 2,5 height stones. There are two parts on every design. Print the inlay up side down and glue them together. For the STLs use the “split to object” function in Prusaslicer to split the parts. Update 2022-04: I…
This is a 3D printed version of the jiggle siphon - an easy way to siphon fluids without the need to first prime the tube. Simply shake the submerged jiggle siphon and fluid will start flowing through the tube. It works as long as the…
What makes it special I spent about a month and a half, off and on, working through versions of this towel hook before I was happy with it. I first saw a design like this while looking for an accessory for one of my printers. It looked…
Please be aware, that these types of knives are prohibited in Canada. This is a minor remix of the trunnions which now include printed threads. There are 2 versions of the trunnions available. One set which looks similar to the originals,…
This is my version of the Gravitrax compatible baseplate with 6 exits and interchangeable insets as well as corner holes for height blocks - all for the construction of flexible tracks. To be able to use this building block, you need to…
Gnome who operates Norman's left leg Shmebulock with a bottle, download here: cults3d.com/en/3d-model/art/shmebulok-gravity-falls
Remixed from Thingiverse User thomasdr if you like my model please leave a like there
To print in two colors like in the images, set up your slicer to change filament at approx. 10.5 mm. For best results, place a dummy cube next to the object and make sure that it is printed first on every layer so that the nozzle is clean…
Here you can find an organizer for Gravitrax rails. They are available in the three common rail lengths. The stackers fit on the original Gravitrax playfield. Happy printing!
——————- Notification: motorized lift 2021 edition (v4) is now available and includes improvements over the v3 model https://www.thingiverse.com/thing:4751904 ——————- This is the fully revised version of the motorized lift for marble…
Meine 140mm Spacer findet ihr hier: https://www.printables.com/de/model/17152-spacer-140mm-gravitrax
