k1 Unibody Riser - corner piece with runout sensor relocate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Works with the rest of the K1 Unibody Riser Frame, no modification.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 99
- Wydruki
- 1
- Wyświetlenia
- 481
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
EDIT: added a reverse mount option to let the cable hang underneath the sensor, rather than needing to route it on top of the sensor.
This piece is to replace the back-right corner of Unibody Riser, in order to mount the Runout Sensor inside. This piece is compatible with the rest of the riser frame.
https://www.printables.com/model/891616-creality-k1-k1c-unibody-riser-frame
You will need 2x PC4 M10 pneumatic connectors as well as some bowden tubing.
You will need to unclip the ziptie off the runout sensor's cable underneath the printer. Take off the bottom plate, locate the runout sensor cable and free it to allow the cable more length.
Print with auto-orient, tree supports on, 0.2 layer height. The hexagon plate is mostly unchanged minus the new hole and connects without hardware, but is fairly loose with tolerance.
Works with all original screws.