Liczymy pasujące modele…
I love the design of the Creality K1 printers. The unibody frame with the beveled edges and corners is just awesome. There are already a lot of risers for this printer out there, but this one extends the original frame of the K1 / K1C.…
Hexagon plates for K1/K1C Unibody Riser Frame . It is a two parts print that should be gluwed together. The plate has clips so you do not need to glue it onto the Unibody Ricer frame. Update 2024-09-28 : I made it easier for you to create…
Hinges option for Creality K1 / K1C Unibody Riser https://www.printables.com/model/891616-creality-k1-k1c-unibody-riser Uodate 2024-10-20: Redesigned hinges for new version of the frame. Update 2023-07-14: I have updated this model.…
Umarım beğenirsiniz, yorumlarınızı ve silinenlerinizi paylaşmayı unutmayın lütfen :)
Few people have said that the fit is snug, I would suggest scaling everything to 102% should make it a bit less snug. Currently i'm working 72hr weeks and don't have the time to get around to fixing this. DISCLAIMER: You will have to trim…
Tank car for my 1:29 Scale Garden railroad. End cap is a customized version of https://www.thingiverse.com/thing:953781 You will need: 3" (3.5" OD) Schedule 40 PVC pipe or 4" OD Aluminum "Air Intake" pipe (Print 4in alternative parts) or…
If you want to create your own side plates for the Unibody Riser , that you can use this file as a template. It is to big to print on the K1 / K1C, so you also need to cut it into peaces first. If you just want plates that are ready to…
I need a stand for my hair dryer to keep it off the countertop from getting wet or scratching the surface. But I have trouble admiring the stand design by Dyson or anything like that. They displayed all the attachments in front of me,…
Made for any space heater Mac minis, but can be used on the newer M series Mac minis, that you want the bottom cover to be on. Works amazingly alongside other stands. The original base is easy to remove, but iFixit has a tutorial on how…
This is based off of Equagga's Unibody Tatting Shuttle. I've increased the size by 30% and added raised lines to improve the grip. I edited this in Fusion 360. Print Settings Printer: Powerspec Ultra 3D Rafts: No Supports: No Resolution:…
This is remix for higher unibody riser for K1C. Print plates as original (painted tree supports on the surface “touching bedplate”) adding more support to flat surface. The chain slot prints as model is placed, with tree supports for top.…
These clips are useable with the newest version of the Creality K1 / K1C Unibody Riser: https://www.printables.com/model/891616-creality-k1-k1c-unibody-riser Update 2024-10-25: With the latest version of the Unibody Riser you do not need…
This is a bottom cover for the 2018 Mac Mini. Replacements are oddly expensive online and I was making another project that attached using the cover's system and since that's the hard part to model I figured I might as well make this…
Here is a "unibody" remix of my previously designed fan duct with dual part cooling for the Ender 3 (Pro). For the assembly you need: 1x 3510 fan 2x 3010 blower fans 1x M3x12 screw 2x M2x5 or M2.5x5 screws (minimum) Assembly: First insert…
A unibody mod for the TophatHingeV0.1 mod from MSiemons. You need a build volume of at least 251x238x96mm!
These prevent the little bits if plastic from getting into the crevices under the side panels. I slimmed down dancan13f's unibody models, removed the magnets, and added a lip and removal lever. Split into objects, flip them on their backs…
A slightly stronger version of the original K1C Unibody Riser Hinge, using bolt and nut. Feel free to edit on my Tinkercad . HOW TO BUILD TIP : You can use rubber washer with lock nut to make friction hold hinges. PARTS LIST These are my…
A unibody mod for the skirts. CANNOT be printed on the V0.1 as it's 200mm long! BOM: use the screws and nuts from the original skirts.
This is a work in progress
1962 Ford F100 Unibody, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
I took the design back to scratch and based on measurements I've redone the model in 2 halves, I've also changed it to make it faster to print and use less material while keeping strength and rigidity. I used Solidworks so I can output…
Mixed Parts from DIY PERSPECTIVE Bambu Lab V6 Adapter and mk3s+ extruder body. This has not been tested, since i dont have the Bamboo extruder. Maybe you can provide this
EDIT: added a reverse mount option to let the cable hang underneath the sensor, rather than needing to route it on top of the sensor. This piece is to replace the back-right corner of Unibody Riser, in order to mount the Runout Sensor…
One ARC to rule them all. The Unibody ARC has a single small size case to fit perfectly into your suit. With the main feature being eleven interchangeable faceplates, so you can swap them out at any time, no matter which ARC you want…
This is based off of Equagga's Unibody Tatting Shuttle. I've increased the size by 30% and added a fox image to improve the grip. I edited this in Fusion 360. Print Settings Printer: Powerspec Ultra 3D Rafts: No Supports: No Resolution:…
These plates fit the original frame model created by @Blender3D_1579401. I redesigned the pattern and incorporated vent holes with a magnet attachment. Since I use different types of filament material, and don't like keeping the top cover…
Clip to attach a right angle headlamp to a headband in a single body. Requires only a (20 mm) textile elastic band. The pocket clip can stay on the light. This is mostly a template for FreeCAD that you can adjust to fit your own…
Wydrukowałeś mój model? Zachęcam do podzielenia się wrażeniami/zdjęciami na jego temat w zakładce realizacje/komentarze :) Każda opinia motywuje mnie do dalszego działania ;) Dziękuję :)
Please like and download the original model to support the creator because its their work, not mine. I just traced the points as a reference to recreate it as a .step file.
This holder sits on top of https://www.printables.com/model/891616-creality-k1-k1c-unibody-riser-frame This is meant to be low profile, as my printer sits under my desk, so although not optimal, it prints TPU just fine! The tolerances…
Unibody Skirts (need a 350mm printer for printing) that take the look of the Darkmatter skirts (minus the slant) and adapt it to a Trident EZBake 300mm. Skirts come with a Waveshare 5DP-CAPLCD mount.
Internal runout sensor mount for https://www.printables.com/model/891616-creality-k1-k1c-unibody-riser-frame
Wydrukowałeś mój model? Zachęcam do podzielenia się wrażeniami/zdjęciami na jego temat w zakładce realizacje/komentarze :) Każda opinia motywuje mnie do dalszego działania ;) Dziękuję :) Mała modyfikacja poprzeczki, poprzez dodanie…
I had some clear PETG laying around so I basically wanted to create windows for the riser part (knowing well that I will not see through it at all). I recommend cutting the model in slicer at 45 ° to slightly hide the cut. Printed on K1…
I'm hoping to find/make some tool holders and stuff for my K1. Obviously this riser is limited in which connectors you can use, since its too short for any vertically stacked pieces. Almost worth stretching the corners of the riser to fit…
A simple Wallet in unibody design. Print it in PETG or ABS for strength and flexibility of the clip. PLA won´t work for a long time. Also added a two-part design if you want to do the clip in another color or whatever. If you have only a…
These are Replacement feet for the Unibody Macbook Pro from Late 2011. For the different corners you need to cut a little bit off the model in the slicer. When looking from the bottom, the top right needs the shortest stump, the bottom…
Instructions I printed my case at .2mm layer height with 15% infill and it works well. Make sure to align the center piece's flat face with the build plate as I have not yet figured out Fusion360 well enough to change this by default. The…
Caps for AA batteries that are a single piece. https://youtu.be/7AitDmVYfzc Caveats The tabs that hold in the batteries can be fragile, depending on the quality of the print and the materials used. The tabs can also scratch the batteries'…
The purpose of this thing is to mount all the premium attachments for a Hemera printhead to the Wham Bam Mutant v2 plate in a single piece (unibody) for the purposes of rigidity and compactness. While there are Mutant mounts out there, at…
Unibody version of a color change i liked. Recommended Settings: layer height: 0.2mm color change at 0.6mm / 2.2mm
I recreated what has been done to make a new unibody top for my K1 Max. A riser is an essential upgrade for your K1 Max. It will help reduce the build-up of heat at the top and allow the Teflon tube to bend enough or loop into the print…
For use with: https://www.printables.com/model/833692-creality-k1-riser-with-cable-chain-removed Print face down abs, asa or petg
This is the unibody-version. For the version with removable arms, go here: https://www.thingiverse.com/thing:5826791 If you need help building it, or you need an adjustment made to the design, please reach out to me on my Discord-channel…
This is a gasket mount design for the Vulpes Majora in 6col and 5col format. It is configured for the PER56 plus trackball setup. There are only three major pieces to print, not including the trackball housing, encoder ring, 5-way switch…
Remixed to suite my headlamp. Can be used with elastic straps that already have the plastic adjustment bits on them. Nice and snug on a light with a 21.3mm body diameter and straps that are 25mm wide. The Solidworks file is easy to…
Plates for the Creality K1 / K1C unibody frame. Two-part model: parts should be welded or glued. Plates feature clips, so no adhesive is required to attach them to the frame. Using:…
I wanted to use some 4010 Vindr fans from West3d on my XOL. These fans have thicker mounting tabs so the supports behind the tabs on the XOL toolhead needed to be adjusted.
edited the unibody to fit 30mm high stepper motors. this also gives enough room to use a RPI3 for example.
Handle with magnets for Unibody Riser Frame since with the Unibody riser it get stuck and doesnt fit. With these is easy to open and closed the lid. 2 magnets are enough and 2 washers. Just choose a good magnets since the lid is a little…
https://youtu.be/zm926lDw7qo An extended version of the Unibody AA Battery Caps . But in a book-bound form. (Before you ask why, ask "why not"). The thing comes with the same caveats: - Tabs can be weak and break if the print or material…
I know it probably doesn't matter, but I don't like the profile of a belt running on a smooth idler so I really liked the ATARAXIA MECHANICA remix. Slicer support have come a long way so I remove the support material and used tree/organic…
54 key split keyboard I designed. it's an easy print, I did .12 layer in both PLA+, Silk PLA. Prints Flat Designed around an Arduino pro-micro. You'll 7 x M3 bolts and heat-set Inserts, 54 switches, 54 keycaps. Feel free to make…
Colours used: Siddament Black PETG https://siddament.com.au/products/black-petg Siddament Gold PETG https://siddament.com.au/products/metallic-gold-petg-hs Siddament Matte Beige PLA https://siddament.com.au/products/matte-beige-pla…
Summary An example of 3D model generated with my Gugulele OnShape script… Decorative headless gourd shaped design Concert ukulele scale length Double rectangular through-body spine Single oval off center sound hole 'T' Bracing Tail-end…
Unibody key no need assembly 1.you need use cura plugin"pause at height",and set"pause height"3.7mm 2.when printer pause,put your motorcycle key inside and continuum Category: Other
Version of the curved hopper with 1-1/4" PVC couplers at the front and back. Has internal slots for m3 nuts - add a pause in the print and insert the nuts mid-print.
this bracket is useful when printing PLA or similar
This is a dust plug designed to be inserted inside the dvd holes of the Unibody Macbook pro. No more undesired dust inside the dvd tray. I've already tried it on 2011 and 2012 model but it should fit newer models. Feel free to give me…
string: added douple mounting holes for btt sfs 2.0 redesigned for more firmly assembly corner: redesigned for more firmly assambly, smaller holes for fixing with self-tapping screw
when open, the top cover stop in a useful position in the photo you can see the first print with a flat stop tail.... then modified to 15° the hinge have a stop tail oriented at 15° the hole is for an M3 screw and connect to riser hinge…
test 3d print model. My notes below: low profile, mx spaced, best for choc v1 or choc v2 switches, with a subtle keywell curve on alpha keys and angled thumbkeys. the 3d case: the keywell switch plate itself modeled with cosmos pro…
My original 56T pulley developed a bit of play after long term use. This remix merges the two halves together into a single piece to eliminate the possibility of developing backlash over time. This requires an M3x6 set screw in place of…
The wheel can be printed with any material and the tire must be printed in TPU or other flexibel filament. I used TPU 95A. 0.2 layers and 20% infill is more than enough for the wheel. The tire is best printed with a random seam and "Avoid…
For no customer friendly reason Apple removed the SD-CARD reader to save 0.03$ and moving much higher cost to the customer, despite having enough room inside the Mac Mini housing. Additional reason is the limited possibility (so far no…
Additional remarks: there are added both 3mf and stl files, as illustrated above, the image displays the model view in OrcaSlicer. To achieve the optimum result, it is recommended that the print be reversed, with the honeycomb pattern…
No rooted firmware for K1C 2025 at time of writing. No custom webcam, no Octolapse. 😡 This is a set of simple Bluetooth remote holder and "trigger stick". Do timelapse with your smartphone by using the print head to trigger the remote on…
This is a fairly thick ZMR 250 spacer designed to be used as a unibody, with all components between the two bottom plates of the ZMR. In addition to fattening the spacer from 10 to 15mms, I shortened the arm mounts from four holes to two…
This support works only with notebooks and macbooks with rubber botton. Print Settings Printer: MakerFarm i3V Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.3 Infill: 10-30 Category: Computer
This is a 3D-printable replacement for the rubber-style bottom feet used on the classic aluminum MacBook and MacBook Pro Unibody models. I designed the part using a 2011 13-inch MacBook Pro A1278 as the reference and tried to reproduce…
These prevent the little bits if plastic from getting into the crevices under the side panels. I slimmed down dancan13f's unibody models, removed the magnets, and added a lip and removal lever. Split into objects, flip them on their backs…
No rooted firmware for K1C 2025 at time of writing. No custom webcam, no Octolapse. 😡 This is a set of simple Bluetooth remote holder and "trigger stick". Do timelapse with your smartphone by using the print head to trigger the remote on…
Tank car for my 1:29 Scale Garden railroad. End cap is a customized version of https://www.thingiverse.com/thing:953781 You will need: 3" (3.5" OD) Schedule 40 PVC pipe or 4" OD Aluminum "Air Intake" pipe (Print 4in alternative parts) or…
Few people have said that the fit is snug, I would suggest scaling everything to 102% should make it a bit less snug. Currently i'm working 72hr weeks and don't have the time to get around to fixing this. DISCLAIMER: You will have to trim…
Greetings. I needed a stand to keep my cell phone vertically and at a comfortable angle on my table, so I made my own design, and I think it could be useful for you. As always, I also provide the editable in case someone wants to make any…
I've recreated the style, but widened it for 10mm wide LED stripes. Hint: The shorter one is for the (optional) filament runout sensor side. I've used 11 longer and 1 shorter one for the whole riser.
Hi all! I am providing for public access a model of the left speaker housing for a MacBook Pro 17" 2008 model a1261. The machine is very old and because of this it is not possible to find new original spare parts. They only sell old spare…
![Creality K1 / K1C Unibody Riser Hexagon Plates [REMIX]](https://media.printables.com/media/prints/77244c66-03d5-4cd7-9d4c-ac0041bc90a4/images/13955769_024766a0-2b51-44ac-88fc-68a0b59d9e7e_23bf5701-d986-4a1d-8678-8f6c52184cb8/orca.jpg)
