Ender 3 (Pro) - 3510/3010 Dual Fan Duct - Unibody
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a "unibody" remix of my previously designed fan duct with dual part cooling for the Ender 3 (Pro).
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 181
- Wydruki
- 1
- Wyświetlenia
- 1583
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Here is a "unibody" remix of my previously designed fan duct with dual part cooling for the Ender 3 (Pro).
For the assembly you need:
- 1x 3510 fan
- 2x 3010 blower fans
- 1x M3x12 screw
- 2x M2x5 or M2.5x5 screws (minimum)
Assembly: First insert the two 3010 fans in their places on the sides (at least fasten at the back with M2/M2.5 screws, the front is optional), finally clip in the 3510 fan at the front.
Installation on the carriage: first lock on the right side and then press the left side onto the carriage - finally screw tight with the longer M3 screw from behind through the carriage into the duct.
Versions:
- There are mainly two versions "with or without BlTouch": they differ in the depth of the standoff for the M3 screw - the shorter one is for mounting on top of a BLTouch mount.
- There are also two versions "with or without LED": one of them is for integrating a 4xled board (the dimensions are designed for the "AURORA RC WS2812B RGB5050 Mini Programmable LED Board ").
Tinkercad Project: https://www.tinkercad.com/things/bemlDqQG9FV
Blower Performance: https://youtu.be/B8FgLm8Qpb8
Ender 3 - Sherpa Mini Extruder Mount: https://www.printables.com/de/model/338647-ender-3-sherpa-mini-extruder-mount
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.4
Infill:
10% Grid
Filament: Any ABS, ASA, PC Black
Notes:
Print with face side down
* Tree support preferred