1 / 4
Creality K1 / K1C Riser / Unibody - Hex Plate with vents (magnatic) — zdjęcie 1
1 / 4

Creality K1 / K1C Riser / Unibody - Hex Plate with vents (magnatic)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Plates that fit the original frame model that incorporate magnets for the vent.

Ocena
5 / 5
Polubienia
15
Pobrania
80
Wydruki
1
Wyświetlenia
944
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

These plates fit the original frame model created by @Blender3D_1579401. I redesigned the pattern and incorporated vent holes with a magnet attachment. Since I use different types of filament material, and don't like keeping the top cover open all the time. 

UPDATE:

  • Relocated PTFE Hole, resized to 10mm, and added fillet

  • Added link for magnets

Main design elements:

  • Cut up the right and left plates into 2 parts each (vent cover and base plate)

  • Magnat holes to hold the vent covers during printing

  • Larger spacing in the pattern. (This will show off the accent color better)

  • Orientated the hexagons   

I've created 2 versions of the right plates, a normal and a PTFE hole version (filement sensor side mount). Choose what suits your setup.

 

My Print settings (Orcaslicer) - I adjusted some parameters to save on filament while keeping its structural integrity intact.

0.4 nozzle - 0.2 layer height - 10% infill (gyroid) 

MANUAL tree supports for the BASE PLATES on the taps and lip (photos below)

suggested (optional):  bridge flow ratio = 1.5 - bridge speed = 15 mm/s

 

BOM:

Thanks, Bobbybeast1, for finding the purchase link for the magnets

  • Super glue to install the magnets

 

This is my first upload design/remix. Let me know if you encounter any issues or have any questions

Tagi