1 / 4
Creality K1 / K1C Riser / Unibody - Hex Plate with vents (magnatic) — image 1
1 / 4

Creality K1 / K1C Riser / Unibody - Hex Plate with vents (magnatic)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Plates that fit the original frame model that incorporate magnets for the vent.

Rating
5 / 5
Likes
15
Downloads
78
Makes
1
Views
931
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

These plates fit the original frame model created by @Blender3D_1579401. I redesigned the pattern and incorporated vent holes with a magnet attachment. Since I use different types of filament material, and don't like keeping the top cover open all the time. 

UPDATE:

  • Relocated PTFE Hole, resized to 10mm, and added fillet

  • Added link for magnets

Main design elements:

  • Cut up the right and left plates into 2 parts each (vent cover and base plate)

  • Magnat holes to hold the vent covers during printing

  • Larger spacing in the pattern. (This will show off the accent color better)

  • Orientated the hexagons   

I've created 2 versions of the right plates, a normal and a PTFE hole version (filement sensor side mount). Choose what suits your setup.

 

My Print settings (Orcaslicer) - I adjusted some parameters to save on filament while keeping its structural integrity intact.

0.4 nozzle - 0.2 layer height - 10% infill (gyroid) 

MANUAL tree supports for the BASE PLATES on the taps and lip (photos below)

suggested (optional):  bridge flow ratio = 1.5 - bridge speed = 15 mm/s

 

BOM:

Thanks, Bobbybeast1, for finding the purchase link for the magnets

  • Super glue to install the magnets

 

This is my first upload design/remix. Let me know if you encounter any issues or have any questions

Tags