1 / 3
FETtec 35A ESC to Kiss FCv2 — zdjęcie 1
1 / 3

FETtec 35A ESC to Kiss FCv2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

There are two different sides to print. The "Left Side" has a cutout for the FCs serial ports to sit into nicely.A…

Ocena
0 / 5
Polubienia
2
Pobrania
5
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

There are two different sides to print. The "Left Side" has a cutout for the FCs serial ports to sit into nicely.

A 20mm to 30mm adapter for mounting the KISS FCv2 above the FETTEC ESC. It's designed with the ImpulseRC Apex in mind, but will work for any frame with a maximum of a 20mm stack height.

  • Use the 10mm countersunk bolts that come with the Apex for the 20x20 holes.
  • Cut/grind ~2.5mm off of the bolts. You want them 7-8mm long.
  • Space the ESC up just enough so the serial port isn't touching the bottom plate.
  • Use the lock nuts to tighten down the adapter pieces on top of the ESC.
  • Tighten down the FCv2 by screwing M3 bolts into the adapter. Use M3 bolts 4mm to 6mm long. Print Settings

Printer Brand:

Creality

Printer:

CR10S PRO

**Rafts:**

No

Supports:

Yes

**Resolution:**

0.2

Infill:

20

**Filament:** Priline TPU

Category: R/C Vehicles

Tagi