1 / 3
FETtec 35A ESC to Kiss FCv2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
There are two different sides to print. The "Left Side" has a cutout for the FCs serial ports to sit into nicely.A…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
There are two different sides to print. The "Left Side" has a cutout for the FCs serial ports to sit into nicely.
A 20mm to 30mm adapter for mounting the KISS FCv2 above the FETTEC ESC. It's designed with the ImpulseRC Apex in mind, but will work for any frame with a maximum of a 20mm stack height.
- Use the 10mm countersunk bolts that come with the Apex for the 20x20 holes.
- Cut/grind ~2.5mm off of the bolts. You want them 7-8mm long.
- Space the ESC up just enough so the serial port isn't touching the bottom plate.
- Use the lock nuts to tighten down the adapter pieces on top of the ESC.
Tighten down the FCv2 by screwing M3 bolts into the adapter. Use M3 bolts 4mm to 6mm long. Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
No
Supports:
Yes
0.2
Infill:
20
Category: R/C Vehicles